Bamo Resistive Level Controller ES 2001

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centering on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader in the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own product range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Bamo Resistive Level Controller ES 2001 | Descriptions

Probes and electrodes are specially designed for a different types of applications. Level Controller ES2001 is used as a limit value detector on conductive liquids; Probes and rods are chosen according to the application. Detection sensitivity to a different types of liquids is set through the built-in potentiometer from 1 to 150 kΩ.

The hysteresis between on/off switching of output relay is about 20% of sensibility. Such a narrow hysteresis limits false detection by a leakage current due to the presence of mist, foam, or condensed vapors.

With both timers, it is easy to adjust the level detection or level regulation to prevent false triggering due to wave effects. For level detection, 1 relay ES2001 is necessary for each independent trigger point.

Features

• For all electrically conductive liquids
• Adjustable sensitivity, timer; selectable operating mode
• Functions:
  • On /Off level controller between 2 rods
  • Level regulation (filling/draining) between 2 thresholds (3 rods)
  • Compatible with all our electrodes

Application

• Control of the level height of electrically conductive liquids
• Fill or drain automated operation

Another Article: Hengesbach Level Module for Installation in Level Probes Type NM Takuwa Water Level Gauge Sensor Mac3 Float Level Switch Hengesbach Level Module NC1 Series Mechatronics Dizzi Fluid Level Sensor

Specification

 

Power supply	230, 115, 48, 24 V AC – 50/60 Hz
	24, 12 V DC
Consumption	≤2VA
	2 Change-over contacts
Outputs
	Max. 250 V AC; 5 A; 500 VA
	Max. 125 V DC; 1 A; 40 W
	Galvanic insulation < 6 V AC / < 2 mA
Powered detection loop
Hysteresis	About 20 % of sensitivity
Sensitivity	Adjustable on 2 ranges
	1 ... 70 kOhm (Low range)
	5 ... 150 kOhm (High range)
	N.O. or N.C through DIP switch
Operating status
Timer	Delay "ON" and "OFF" from 0.5 to 3 s
	Adjustable through a potentiometer
	-15 ... +45 °C
Ambient temperature
Mounting	Rail DIN 46277
Protection	IP 40 (tropicalization on request)

Ref: bamo.eu

Contact us : sales@wmablog.com or visit our E-Commerce

Download Data Sheet: Resistive Level Controller ES 2001