Danfoss DST P40I Titanium Pressure Transmitter for Harsh Environments

 

DST P40I

Danfoss Sensor Technology (DST) P40I pressure transmitter has been designed for use in corrosive industrial environments such as desalination systems, sea water cooling, waste water, etc..

The enclosure of the pressure transmitter is machined out from a single piece of Titanium to eliminate any structural weaknesses. Titanium is exceptionally resistant to a broad range of acids and alkalis, as well as Sodium Chloride and polluted waters. Titanium’s corrosion resistance together with its low density, high strength and erosion resistance, make this pressure transmitter ideal for numerous chemical processing and marine uses.

The pressure sensing element is made from ceramic Al2O3 96% which has excellent chemical immunity and is suitable for nearly all aggressive media. The pressure transmitter works following the piezo resistive principle and the Wheatstone bridge is screen printed directly on one side of the ceramic diaphragm by means of Thick Film technology.

Features

Features

Designed for use in corrosive industrial environments such as desalination systems, medical industry, chemical processing, chlorate containing liquids, hydro-carbon processing, etc.

• Enclosure Titanium grade 2
• Temperature compensated
• Reverse polarity protected
• Gauge (relative)
• Wetted parts: Titanium & Ceramic
• Ceramic Al2O3 96%
• High linearity and low hysteresis value
• ROHS compliance

Another Article: Bamo Pressure Switches XMLA Bamo Pressure Gauge P103 Differential Pressure Switch D33 SeriesS34 Differential Pressure Switch Delta Mobrey Pressure Switch 203 Series Delta Mobrey

Specifications

Technical data

Transmitter type			DST P40I
Accuracy (incl. non-linearity, hysteresis and repeatability)			< ± 1% FS (typ.) @ ambient temperature
Compensated temperature range			0 – 80 °C
Total error band within compensated temperature range			± 1.5% FS (typ.)
Output type			4 – 20 mA
Pressure reference			Gauge
Supply voltage range			9 – 32 V DC
Rise time (10 – 90%)			< 5 ms
Overload pressure			2 x FS
Burst pressure			2.5 x FS
Durability			P:10-90%FS > 10 mio cycles
Media temperature range			-15 – 85 °C
Ambient temperature range			Depending on electrical connection see page 5
Storage temperature range			-40 – 105 °C
Load [RL]			RL£(UB-8V)/0,02A
EMC – Emission			EN 61000-6-3
EMC – Immunity			EN 61000-6-2
Vibration stability	Sinusoidal	15.9 mm-pp, 5 Hz – 25 Hz	IEC 60068-2-6
		20 g, 25 Hz – 2 kHz
Shock resistance	Shock	100 g / 1 ms	IEC 60068-2-27

Pressure range

0 – 4 bar	Gauge
0 – 6 bar	Gauge
0 – 10 bar	Gauge
0 – 16 bar	Gauge
0 – 25 bar	Gauge
0 – 100 bar	Gauge

Download Datasheet : Danfoss DST P40I Titanium Pressure Transmitter for Harsh Environments

Reference : danfoss.com