E2E-X AC 2-Wire Models, Omron-Standard Proximity Sensor

 E2E-X AC 2-Wire Models, Omron-Standard Proximity Sensor

These Proximity Sensors use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.

Features and Benefits

• Standard Sensors for detecting ferrous
• A wide array of variations. Ideal for a variety of
• Models with different frequencies are also available to prevent mutual
• Superior environment resistance with standard cable made of oil-resistant PVC and sensing surface made of a material that resists cutting
• Useful to help prevent
• Cable protector provided as a standard feature

Ratings and Specifications

Size Shielded Item                 Model			M8		M12		M18		M30
			Shielded	Unshielded	Shielded	Unshielded	Shielded	Unshielded	Shielded	Unshielded
			E2E-X1R5Y@	E2E-X2MY@	E2E-X2Y@	E2E-X5MY@	E2E-X5Y@	E2E-X10MY@	E2E-X10Y@	E2E-X18MY@
Sensing distance			1.5 mm ±10%	2 mm ±10%		5 mm ±10%		10 mm ±10%		18 mm ±10%
Set distance			0 to 1.2 mm	0 to 1.6 mm		0 to 4 mm		0 to 8 mm		0 to 14 mm
Differential travel			10% max. of sensing distance
Detectable object			Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 18.)
Standard sensing object			Iron, 8 ´ 8 ´ 1 mm	Iron, 12 ´ 12 ´ 1 mm		Iron, 15 ´ 15 ´ 1 mm	Iron, 18 ´ 18 ´ 1 mm	Iron, 30 ´ 30 ´ 1 mm		Iron, 54 ´ 54 ´ 1 mm
Response frequency			25 Hz
Power supply voltage (operating voltage range)*1			24 to 240 VAC (20 to 264 VAC), 50/60 Hz
Leakage current			1.7 mA max.
Control output	Load current *2		5 to 100 mA		5 to 200 mA		5 to 300 mA
	Residual voltage		Refer to Engineering Data on page 19.
Indicators			Operation indicator (red)
Operation mode (with sensing object approaching)			Y1 Models: NO     Refer to the timing charts under I/O Circuit Diagrams on page 21 for details. Y2 Models: NC
Protection circuits			Surge suppressor
Ambient temperature range *1*2			Operating/Storage: -25 to 70°C (with no icing or condensation)		Operating/Storage: -40 to 85°C (with no icing or condensation)
Ambient humidity range			Operating/storage: 35% to 95% (with no condensation)
Temperature influence			±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C		±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C, ±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence			±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Insulation resistance			50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength			4,000 VAC (M8 Models: 2,000 VAC), 50/60 Hz for 1 min between current-carrying parts and case
Vibration resistance			Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance			Destruction: 500 m/s2 10 times each in X, Y, and Z directions		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection			Pre-wired Models: IEC 60529 IP67, in-house standards: oil-resistant Connector Models: IEC 60529 IP67
Connection method			Pre-wired Models (Standard cable length: 2 m) and Connector Models
Weight (packed state)		Pre- wired Models Model	Approx. 60 g		Approx. 70 g		Approx. 130 g		Approx. 175 g
		Connec- tor Models	Approx. 15 g		Approx. 25 g		Approx. 40 g		Approx. 90 g
Materials		Case	Stainless steel (SUS303)		Nickel-plated brass
		Sensing surface	PBT
		Clamp- ing nuts	Nickel-plated brass
		Toothed washer	Zinc-plated iron
Accessories			Instruction manual

Download Catalog: Standard Proximity Sensor E2E

Ref: Omron.co.id