E2EF, Omron-Proximity Sensor with All-stainless Housing
These Proximity Sensors use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.
Features and Benefit
- Completely stainless-steel housing
- Long-distance detection equivalent to or greater than Proximity Sensors with Resin Heads *1
- More than 20 times *2 the durability of Proximity Sensors with Resin Heads
- Spatter-resistant Models with fluororesin coating are
- Aluminum chip immunity
- Pre-wired Smartclick Connector Models are also
*1. The actual sensing distance will vary with the size or material of the object.
For details, refer to Engineering Data.
*2. Test results for stainless-steel brush rotating at 130 rpm.
Ratings and Specifications
Size | M8 | M12 | M18 | M30 | |||||
Shielded | Shielded | ||||||||
Exterior | Completely stainless- steel housing | Fluororesin coating | Completely stainless- steel housing | Fluororesin coating | Completely stainless- steel housing | Fluororesin coating | Completely stainless- steel housing | Fluororesin coating | |
Item |
Model | E2EF-X2D1 (-M1TGJ) | E2EF-QX2D1 (-M1TGJ) | E2EF-X3D1 (-M1TGJ) | E2EF-QX3D1 (-M1TGJ) | E2EF-X7D1 (-M1TGJ) | E2EF-QX7D1 (-M1TGJ) | E2EF-X12D1 (-M1TGJ) | E2EF- QX12D1 (-M1TGJ) |
Sensing distance | 2mm±10% | 3mm±10% | 7mm±10% | 12mm±10% | |||||
Set distance | 0 to 1.4 mm | 0 to 2.1mm | 0 to 4.9mm | 0 to 8.4mm | |||||
Differential travel | 15% max. of sensing distance | ||||||||
Sensing object | Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 6.) | ||||||||
Standard sensing object | Iron, 12 ´ 12 ´ 1 mm | Iron, 12 ´ 12 ´ 1 mm | Iron, 30 ´ 30 ´ 1 mm | Iron, 54 ´ 54 ´ 1 mm | |||||
Response frequency * | 200Hz | 80Hz | 100Hz | 50Hz | |||||
Power supply voltage | 10 to 30 VDC, ripple (p-p) : 10% max. | ||||||||
Leakage current | 0.8 mA max. | ||||||||
Output configuration | With polarity | ||||||||
Control output | Switching capacity | 3 to 100 mA | |||||||
Residual voltage | 3 V max.(Load current : 100 mA max., Cable length : 2 m) | ||||||||
Indicators | Operation indicator (red LED), Setting indicator (green LED) | ||||||||
Operation mode (with sensing object approaching) |
NO(normally open) | ||||||||
Protection circuits | Surge suppressor, Load short-circuit protection | ||||||||
Ambient temperature range | Operating : -10 to 70°C, Storage : -25 to 70°C (with no icing or condensation) | ||||||||
Ambient humidity range | Operating/Storage : 35% to 95% (with no condensation) | ||||||||
Temperature influence | ±20% max. of sensing distance at 23°C in the temperature range of -10 to 70°C. | ||||||||
Voltage influence | ±1% max. of sensing distance at rated voltage in the rated voltage ±15% range | ||||||||
Insulation resistance | 50 MÙ min. (at 500 VDC) between current-carrying parts and case | ||||||||
Dielectric strength | 1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case | ||||||||
Vibration resistance | Destruction : 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions | ||||||||
Shock resistance | Destruction : 500 m/s2 10 times each in X, Y, and Z di- rections |
Destruction : 1,000 m/s2 10 times each in X, Y, and Z directions | |||||||
Degree of protection | IEC 60529 IP67 | ||||||||
Connection method | Unmarked : Pre-wired Models (Standard cable length : 2 m) Models ending with -M1TGJ : Pre-wired Connector Models (Standard cable length : 300 mm) | ||||||||
Weight (packed state) | Pre-wired Models (2 m) | Approx. 105 g | Approx. 190 g | Approx. 215 g | Approx. 295 g | ||||
Pre-wired Connector Models |
Approx. 65 g |
Approx. 85 g |
Approx. 110 g |
Approx. 190 g | |||||
Materials | Case | Stainless steel (SUS303) (E2EF-QX@D : SUS303, with fluororesin coating) | |||||||
Sensing surface (thickness) | Stainless steel (SUS303) (E2EF-QX@D : SUS303, with fluororesin coating) | ||||||||
0.2mm | 0.4mm | 0.4mm | 0.5mm | ||||||
Clamping nuts | Stainless steel (SUS303) (E2EF-QX@D : SUS303, with fluororesin coating) | ||||||||
Toothed washer | Zinc-plated iron | ||||||||
Cable | PVC (flame retardant) | ||||||||
Accessories | Instruction manual |
Download Catalog:
Ref: Omron.co.id
Komentar
Posting Komentar
Informasi Pilihan Identitas:
Google/Blogger : Khusus yang punya Account Blogger.
Lainnya : Jika tidak punya account blogger namun punya alamat Blog atau Website.
Anonim :