E2EQ, Omron-Spatter-resistant Proximity Sensor - Wiratama Mitra Abadi | Industrial Equipment

Breaking

28.12.20

E2EQ, Omron-Spatter-resistant Proximity Sensor

E2EQ, Omron-Spatter-resistant Proximity Sensor


 E2EQ, Omron-Spatter-resistant Proximity Sensor

These Proximity Sensors use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. Proximity Sensors are available in models using high-frequency oscillation to detect ferrous and non-ferrous metal objects and in capacitive models to detect non-metal objects. Models are available with environment resistance, heat resistance, resistance to chemicals, and resistance to water.

Features and Benefits

  • Superior spatter
  • Long Sensing-distance Models added for sensing distances up to 15
  • Pre-wired Smart click Connector Models are also

Specifications

Long Sensing-distance Models

Model

Item

E2EQ-X4X1

E2EQ-X4X1-M1(T)J

E2EQ-X8X1

E2EQ-X8X1-M1(T)J

E2EQ-X15X1

E2EQ-X15X1-M1(T)J

Sensing distance4 mm ±10%8 mm ±10%15 mm ±10%
Set distance *10 to 3.2 mm0 to 6.4 mm0 to 12 mm
Differential travel15% max. of sensing distance
Standard sensing objectIron, 12 ´ 12 ´ 1 mmIron, 18 ´ 18 ´ 1 mmIron, 30 ´ 30 ´ 1 mm
Response frequency *21 kHz0.5 kHz0.25 kHz
Control outputLoad current3 to 100 mA
Residual voltage *35 V max. (Load current: 100 mA, Cable length: 2 m)
Operation mode (with sensing object approaching)Load ON: NO; For details, refer to the timing charts on page 5.
Protection circuitsLoad short-circuit protection, Surge suppressor
Ambient temperature rangeOperating: -25 to 70°C, Storage: -40 to 85°C, (with no icing or condensation)
Temperature influence

±15% max. of sensing distance at 23°C in the temperature range of -40 to 85°C

±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C

±15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence±1% max. of sensing distance at rated voltage in the rated voltage ±15% range
Shock resistanceDestruction: 1,000m/s2 10 times each in X, Y, and Z directions
Connection methodPre-wired Models (Standard cable length: 2 m), Pre-wired Connector Models
Weight (packed state)Pre-wired ModelsApprox. 65 gApprox. 140 gApprox. 190 g
Pre-wired Connector ModelsApprox. 20 gApprox. 40 gApprox. 90 g

Common Ratings and Performance

Model

 

Item

E2EQ-X4X1 E2EQ-X4X1-M1(T)J

E2EQ-X3D1 E2EQ-X3D1-M1(T)GJ

E2EQ-X8X1 E2EQ-X8X1-M1(T)J

E2EQ-X7D1 E2EQ-X7D1-M1(T)GJ

E2EQ-X15X1 E2EQ-X15X1-M1(T)J

E2EQ-X10D1 E2EQ-X10D1-M1(T)GJ

Detectable objectFerrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 4.)
Power supply voltage (operating voltage range)12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Leakage current0.8 mA max.
IndicatorsOperation indicator (red), Setting indicator (green)
Ambient humidity rangeOperating/Storage: 35% to 95% (with no condensation)
Insulation resistance50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength1,000 VAC for 1 min between current-carrying parts and case
Vibration resistanceDestruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Degree of protectionIEC 60529 IP67, in-house standards: oil-resistant

 

 

Materials

CaseFluororesin coating (Base material: brass)
Sensing surfaceFluororesin
Clamping nutsFluororesin coating (Base material: brass)
Toothed washerZinc-plated iron
AccessoriesInstruction manual

Standart Model 

Model

Item

E2EQ-X3D1 E2EQ-X3D1-M1(T)GJE2EQ-X7D1 E2EQ-X7D1-M1(T)GJE2EQ-X10D1 E2EQ-X10D1-M1(T)GJ
Sensing distance3 mm ±10%7 mm ±10%10 mm ±10%
Set distance0 to 2.4 mm0 to 5.6 mm0 to 8 mm
Differential travel10% max. of sensing distance
Standard sensing objectIron, 12 ´ 12 ´ 1 mmIron, 18 ´ 18 ´ 1 mmIron, 30 ´ 30 ´ 1 mm
Response frequency *1 kHz500 Hz400 Hz
Control outputLoad current3 to 100 mA
Residual voltage3 V max. (Load current: 100 mA, Cable length: 2 m)
Operation mode (with sensing object approaching)Load ON: NO; For details, refer to the timing charts on page 5.
Protection circuitsLoad short-circuit protection, Surge suppressor
Ambient temperature rangeOperating/Storage: -25 to 70°C (with no icing or condensation)
Temperature influence±10% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Voltage influence±2.5% max. of sensing distance at rated voltage in the rated voltage ±15% range
Shock resistanceDestruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Connection method

E2EQ-X@D1: Pre-wired Models (Standard cable length: 2 m)

E2EQ-X@D1-M1GJ: Pre-wired Connector Models (Standard cable length: 300mm)

Weight (packed state)Pre-wired ModelsApprox. 120 gApprox. 160 gApprox. 220 g
Pre-wired Connector ModelsApprox. 80 gApprox. 110 gApprox. 190 g

Download Catalog: E2EQ, Omron-Spatter-resistant Proximity Sensor

Ref: Omron.co.id

Tidak ada komentar:

Posting Komentar

Informasi Pilihan Identitas:
Google/Blogger : Khusus yang punya Account Blogger.
Lainnya : Jika tidak punya account blogger namun punya alamat Blog atau Website.
Anonim :