Flux Mixers Slow Runners

The mixing effect that flows develop depends on the shape of the container, the material and of course the type of mixer. Due to the flexible modular system FLUX is able to offer a wide range of options. This makes it possible to configure the mixer components of motor, shaft and mixing blade optimally for the application's requirements. If low speed is required slow running versions can be configured which are provided with intermediate gear and special mixing blades. The FLUX mixers are available in various materials and with different mixing blades.

FLUX mixers for dispersing, emulsifying, homogenising, chilling, dissolving, mixing, neutralising, stirring, circulating or exchanging heat efficiently can be used for container sizes from 30 to 30000 litres.

The FLUX mixer program was consistently developed as a modular system. The drive motors are in correspondence with the IEC standard. The mixer shafts in lengths of 150 to 1800 mm are offered in stainless steel 316 L or with a coating in PVDF or PE and can thus be used for various types of liquids.

Features:

• Circulating performance: up to 3.600 m³/h
• Low speed: approx. 70 rpm
• For fluids of up to a viscosity of 10 000 mPas
• With gear
• Versions available with sliding or folding agitators
• Can be used in tanks
• For liquids with max. 10 % solids
• For run-through systems with 10 – 40 fold flow per hour

Specification:

• Viscosity: max. 10.000 mPas*
• Circulating performance : max. 3.600 m³/h*
• Container sizes: 30 l to 30.000 l*
• Individual Components:

Motor BG90

Rated output		1.5 kW (IE3)
Power supply		3~Phase, 50Hz ¦¦ 60Hz
Rated voltage		/\230V, Y380-400V ¦¦ Y460-480V
Degree of protection		IP 55 (PTC-Sensor) / Isol.-class F
Current at rated	voltage	/\~5.80 A,Y~3.30 A ¦¦ Y~3.30 A
Rated speed		1500 rpm ¦¦ 1800 rpm

Download Data Sheet: Mixers Slow Runners

Ref: flux-pumps.com