Mercotac Four, Six, and Eight Conductor Electrical Connectors

Four Conductor

Model 430

 Model 430

Four Conductors, 2@4amps, 2@30amps

• Disconnects included
• (4 sm., 4 lg.)
• Boot Kit available
• Available with stainless steel ball bearing (430-SS)

Mercotac model 430 is ideal for heated roller applications, where connecting to senstive thermocouple signals and simultaneously powering the heater are required.

Model No.

Terminals

Voltage AC/DC

Amp Rating @240VAC

Max. Freq. MHz

Contact Resistance

Max. RPM

Temp Max. F (C) / Min. F (C)

Rotation Torque (gm-cm)

Circuit Separation

 

430	4	0-250	2@4/2@30	100	<1m	1200	140 (60) /-20(-29)	400	>25M
430-SS	4	0-250	2@4/2@30	100	<1m	1200	140 (60) /-20(-29)	400	>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 430 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Model 435

Four Conductors, 4@30amps & 500V

[caption id="attachment_59439" align="aligncenter" width="241"] Model 435[/caption]

• Disconnects included
• (8 lg.)
• Boot Kit available
• Available with stainless steel ball bearing (435-SS)

Model No.

Terminals

Voltage AC/DC

Amp Rating @500VAC

Max. Freq. MHz

Contact Resistance

Max. RPM

Temp Max. F (C) / Min. F (C)

Rotation Torque (gm-cm)

Circuit Separation

435	4	0-500	30	100	<1m	300	140 (60) /-20(-29)	850	>50M
435-SS	4	0-500	30	100	<1m	300	140 (60) /-20(-29)	850	>50M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 435 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Model 4100

Four Conductors, 3@100amps & 1@60amps 500V

[caption id="attachment_59440" align="aligncenter" width="248"] Model 4100[/caption]

• Wire connection clamps included

Model No.

Terminals

Voltage AC/DC

Amp Rating @500VAC

Max. Freq. MHz

Contact Resistance

Max. RPM

Temp Max. F (C) / Min. F (C)

Rotation Torque (gm-cm)

Circuit Separation

4100

4

0-500

3@100,1@60

100

<1m

100

160(70) /-20(-29)

2500

>50M

Connector housing material is anodized aluminum

Model 4100 is typically mounted by the black anodized aluminum body using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates. For vertical orientation with the rotating member above, mount to the model 4100 top (gray) plastic bushing.

Six Conductor

Model 630

Six Conductors, 2@4amps, 4@30amps

[caption id="attachment_59441" align="aligncenter" width="252"] Model 630[/caption]

• Disconnects included
  (4 sm., 8 lg.)
• Boot Kit available
• Available with stainless steel ball bearing (630-SS)

Model No.

Terminals

Voltage AC/DC

Amp Rating @240VAC

Max. Freq. MHz

Contact Resistance

Max. RPM

Temp Max. F (C) / Min. F (C)

Rotation Torque (gm-cm)

Circuit Separation

630	6	0-250	2@4/4@30	100	<1m	300	140 (60) /-20(-29)	700	>25M
630-SS	6	0-250	2@4/4@30	100	<1m	300	140 (60) /-20(-29)	700	>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 630 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Eight Conductor

Model 830

Eight Conductors, 2@4amps, 6@30amps

[caption id="attachment_59442" align="aligncenter" width="213"] Model 830[/caption]

• Disconnects included
  (4 sm., 12 lg.)
• Boot Kit available
• Available with stainless steel ball bearing (830-SS)

Model No.

Terminals

Voltage AC/DC

Amp Rating @240VAC

Max. Freq. MHz

Contact Resistance

Max. RPM

Temp Max. F (C) / Min. F (C)

Rotation Torque (gm-cm)

Circuit Separation

830	8	0-250	2@4/6@30	100	<1m	200	140 (60) /-20(-29)	1000	>25M
830-SS	8	0-250	2@4/6@30	100	<1m	200	140 (60) /-20(-29)	1000	>25M

"SS" designator indicates stainless steel ball bearing (recommended for wet or corrosive environments)

Model 830 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.

Reference : mercotac.com

Another Article: 

Mercotac One Conductor Electrical Connectors
Mercotac Two Conductor Electrical Connectors
K-Series (3.5mm) Plugs & Jacks-Amphenol, Connector
XLR Connector, Amphenol-AC Series PCB Chassis Mount (B Type)
XLR AC Series PCB Chassis Mount (A Type), Amphenol-Connector