Model: K09-R Heinrich Low Volume-variable area-with glass tube

 Model K09-R Low Volume - variable area - with glass tube

The K09-R meter is suitable for flow measurement of liquid or gaseous products in pipes. It shows the current flow rate in volume or mass per unit in time.

Flow measuring of liquids and gas can be used in the chemical industry or medical or laboratory engineering. Precision, reliability, and efficiency are the remarkable features of this device. This device is a robust mechanical system with a low-rate of wear.

The variable-area flowmeter consists of a stainless steel device with an integrated conical measuring tube made of glass and a vertically
movable float.


Flow control of liquids and gases in pipelines
K09-R.N for fluctuating inlet pressure
K09-R.V for fluctuating outlet pressure

Approvals and certificates

Explosion Protection:
Labelling of non-electrical instruments K09:
Reg. No.: BVS 10 ATEX H-B 034
Labelling of the limit switch
PTB 99 ATEX 2128 X
II 2G Ex ia IIC T6

Another Article:

Technical Data:

Water: 0,02-0,25 l/h / 10-100 l/h
Air:2,0-20 Nl/h / 300-3.000 Nl/h
Measuring and control range K09-R V / N 10-100%
Electronic outputs:inductive switches
Reference conditions:water 20 °C , air 20 °C, 1,2 bar abs
Measuring error:liquid/ gas: ± 3% of upper range value qG= 50% gem. VDE/VDI 3513 Bl. 2
Control deviation:liquid/ gas ± 5% of upper range value
Metering of liquid products with suitable viscosity, free of solids, not clog and do not tend to form deposits..
Gases with linear flow characteristics and adequate inlet pressure
Nominal pressure:PN16 (max. unilateral pressure resistance of the diaphragm is 7 bar)
Process temperature: 0°C up to +100°C (without switch)
 0°C up to +70°C (with switch)
Ambient temperature: 0°C up to +80°C
Ingress protection:IP 65 (EN60529)

Download Catalog: Low Volume - variable area - with glass tube Model K09-R Heinrich