Omron-Separate Amplifier Proximity Sensor E2C / E2C-H

Omron-Separate Amplifier Proximity Sensor E2C / E2C-H | with Adjustment Potentiometer

Features

• Compact design with smaller Sensor
• Heat-resistance model was available for application between -10 and 200°C.

Specifications

Model Item		E2C-CR8A/ -CR8B	E2C-X1A/ -C1A	E2C-X1R5A	E2C-X2A	E2C-X5A	E2C-X10A	E2C-C20MA
Sensing distance (at 23°C)		1.8 mm	2 mm	3 mm	5 mm	10 mm	18 mm	50 mm
Stable sensing area	Ambient temperature	0 to 0.8 mm	0 to 1 mm	0 to 1.5 mm	0 to 2 mm	0 to 5 mm	0 to 10 mm	0 to 20 mm
	At 0 to 40°C	0 to 1.2 mm	0 to 1.5 mm	0 to 2 mm	0 to 2.5 mm	0 to 7 mm	0 to 15 mm	0 to 28 mm
Differential travel		Refer to Ratings and Specifications on page 4 for Amplifier Unit specifications.
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 7.)
Standard sensing ob- ject		Iron, 5 ´ 5 ´ 1 mm		Iron, 8 ´ 8 ´ 1 mm	Iron, 12 ´ 12 ´ 1 mm	Iron, 18 ´ 18 ´ 1 mm	Iron, 30 ´ 30 ´ 1 mm	Iron, 50 ´ 50 ´ 1 mm
Response frequency *1		1 kHz		800 Hz		350 Hz	100 Hz	50 Hz
Ambient temperature range		Operating/Storage: -25 to 70°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		15% max. of sensing distance at 23°C in the temperature range of -25 to 70°C
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X and Y directions
Shock resistance		Destruction: 500 m/s2 3 times each in X and Y directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method *2		Pre-wired Models
		High-frequency coaxial cable (Standard cable length: 3 m)
Weight (packed state)		Approx. 40 g	Approx. 45 g	Approx. 50 g	Approx. 60 g	Approx. 140 g	Approx. 270 g	Approx. 300 g
Materi- als	Case	Stainless steel	Brass
	Sensing surface	ABS resin
	Cable	Polyethylene
	Clamping nut	---	Brass, nickel-plated (except E2C-C1A)
	Toothed washer	---	Brass, zinc-plated (except E2C-C1A)
Accessories		---

*1. The minimum value when using the solid-state control output on the Amplifier Unit.

Measurement conditions are as follows: standard sensing object, a distance of twice the standard sensing object, and a set distance of half the sensing distance.

*2. Refer to 6 for cable lengths when combining Amplifier Units and Sensors. The characteristic impedance of the high-frequency coaxial cable is 50 Ù.

Download Catalog: Separate Amplifier Proximity Sensor with Adjustment Potentiometer E2C or E2C-H

Ref: Omron.co.id