Shand & Jurs 92500 Retrofit Automatic Tank Gauge

The Shand & Jurs 92500 Retrofit Gauge is specifically designed to replace existing Varec Model 2500 Gauges and GSI 2500 Model in existing installations. The S&J 92500 allows for improvement in accuracy while minimizing field labor to replace existing gauges.

S&J’s design allows for a simple retrofit onto existing gauge piping in-ground reading installations. Absolutely no piping modifications are necessary, allowing for easy replacement of Varec or GSI Gauges. Future field service and maintenance are reduced due to the 92500’s improved design over existing gauges.

The S&J 92500 meets or exceeds the Varec or GSI stated accuracy for the existing installation. Since the 92500 is equipped with the Accutrak 90 Modular Cartridge, gauging accuracy and ease of maintenance with respect to existing systems improves.

Choice of materials, rugged construction, and counter housing sealed from gauge head permit the application of the gauging system to a wide variety of environmental conditions. An operational checker for manually jogging the tape to ensure a “free movement” system is standard on gauge head as well as provisions for optional high and low-level limit switches. A hand crank for manually raising and lowering the float is also optional. Complete accessory kits are available for all standard and most special tank configurations and cover a broad selection of materials.

Features

Features

• Replaces existing Varec 2500 Gauge
• Replaces existing GSI 2500 Gauge
• Mounts to existing gauge piping
• Absolutely no field modifications necessary
• Meets and exceeds original manufacturer’s accuracy
• Reduces maintenance
• Easy Service
• Includes Acutrak 90TM Cartridge

Another Article: Hengesbach Level Module for Installation in Level Probes Tyoe NM Takuwa Water Level Gauge Sensor Hengesbach Level Module NC1 Series Mechatronics Dizzi Fluid Level Sensor Bamo Hydrostatic Level Transmitter MEMPRO Ex C

Benefits

• Accuracy
  Large digital readout driven by accurately perforated tape meets API standards of accuracy.
• Reliability
  Long contact arc of tape on the sprocket and non-jamming instruction of rotating parts assure reliability. Constant tension on float results inaccurate reading; also, ventilated counter housing is non-fogging
• Versatile
  Low copper aluminum body, carefully selected materials for internals, optional features, and accessories make this system adaptable to most products and storage vessels.
• Economical
  A limited number of mounting brackets minimize installation cost. Complete gauging system “kits” for each installation further reduce cost.
• Easier Service
  Negator spring and housing easily replaced.
• Safe
  A totally enclosed negator motor protects maintenance personnel during service.

Specifications

• Type of Service: Normal (Aluminum), Ammonia (Aluminum), Severe (Iron)
• Maximum Pressure: 15 PSIG, Normal or Ammonia Service; 50 PSIG, Severe Service
• Temperature Range: -30° to 180° F*
• Gauging Range: to 90 feet (Standard)** ; to 27.4 meters (Standard)**
• Type of Kit Class: Class (A) Normal Service; Class (B) Ammonia Service; Class (C) Severe Service
• Maximum Pressure: 15 PSIG* (With Standard 316 Stainless Steel Float); 50 PSIG* (With Reinforced 304 Stainless Steel Float)
• Support Bracket: Steel
• Anchor Bar: Steel
• Guide Wire Spring Assembly: Steel
• Guide Wire: Stainless Steel
• Pulley Housing: Cast Aluminum - Class A & B; Nodular Iron- Class C
• Pulley: Delrin - Class A; Cast Aluminum - Class B Class C
• Floats:
  Model JB3010 - 23
  Standard Stainless Steel Pan Float (14” Dia.)
  15 PSIG with guides (17” Centers)
  Model JB3010-23-1
  Stainless Steel Pan Type Float (14” Dia.)- for Floating.
  Roof tanks below 3 PSIG without guides
  Model JB3031-23
  Reinforced Stainless Steel Pan Type. Float (14” Dia.)
  *50 PSIG with guides (17” Centers)

* For service below -30°F consult factory.
** For higher ranges consult factory.

Materials of Construction

• Body and Cover: Cast Aluminum (Normal & Ammonia Service); Nodular Iron (Severe Service)
• Counter Housing: Cast Aluminum
• Constant Power Spring: Stainless Steel
• Perforated Tape: 316 Stainless Steel
• Sprocket Wheel: Cast Aluminum
• Tape Reel: Ryton®
• Bearing & Seals: Ball Bearings and Teflon
• Hardware: Steel
• Storage Hub: Ryton®

* For service below -30°F consult factory.
** For higher ranges consult factory.

Download Datasheet: Shand & Jurs 92500 Retrofit Automatic Tank Gauge

Reference: ljtechnologies.com