Shand & Jurs 94060 FRP Conservation Vent

Shand & Jurs 94060 FRP Conservation Vent

The Shand & Jurs Model 94060 Conservation Vent is constructed of Fiberglass Reinforced Plastic (FRP). It has been designed for superior corrosion resistance in oxidizing environments.

The 94060 is ideally suited for a variety of tank storage and product conservation applications. It is applicable to the chemical, petroleum, petrochemical, and waste treatment industries. This conservation vent can be utilized at the end of the line allowing vapors to escape into the atmosphere. An optional closed vent design is available to pipe-away hazardous vapors not allowed to be readily released.

The 94060 is available in the following configurations: (1) pressure/vacuum (OPEN), (2) pressure/vacuum with pipe-away (CLOSED), (3) pressure only (open or closed), and (4) vacuum only (VACUUM). Its method of operation allows pallets in the vent housing to open and close permitting the vacuum or pressure relief necessary to remain within permissible settings thus avoiding damage to the tanks.

The weights are resin-coated lead. Available in 2” through 24” sizes with standard ANSI 125/150 lb or EN1092-1 PN10/16 flanges.

Construction options such as encapsulated weights and extra corrosion barriers allow for use in extremely corrosive environments such as 36% HCL.

The 94060 is easy to install and is completely compatible with existing pipes, vents, and tank fittings. Its low initial cost and ease of maintenance make the FRP Conservation Vent an attractive alternative to Stainless Steel, Hastelloy, and Monel construction.

     Another Article:

Features

  • One-piece construction prevents product leakage
  • Self Draining Housing prohibits condensate from seating surface
  • Simple installation & maintenance
  • Vent protection from freezing, binding and clogging
  • Optional pipe-away relieves vapors through a flanged connection
  • 470 Derakane standard, 411 Derakane and Furan available

Specifications

  • Sizes:
    2’’, 3’’, 4’’, 6’’, 8’’, 10” & 12” (16”, 20”, 24” Pressure only)
  • Standard Pressure & Vacuum Setting:
    1/2 oz./in.2
  • Flange:
    To match drilling of ANSI 125/150 lb., EN1092-1 PN10/16, API 650 flat face.

Materials of Construction

  • Body:
    Fiberglass and choice of vinyl ester resins 411 or 470 Derakane. Furan is also available.
  • Weights:
    Resin-coated steel or lead. FRP Encapsulated steel or lead option.
  • External Hardware:
    316 S.S. (Hastelloy “C” Optional)
  • Internal Stem & Guides:
    Same material as body Diaphragm

Download Datasheet: Shand & Jurs 94060 FRP Conservation Vent

Reference: ljtechnologies.com

Berbagi:  

Komentar

Articles