Camsco Electric Rainproof TB Series Time Switch IP-53

CAMSCO ELECTRIC provides a wide selection of time switches to the world. CAMSCO’s automatic timer switches with several advantages, such as direct reading clock type with minute adjust knob to set time precisely to the minute, back up battery for 100 hours when power failure and attractive design.

• When the time switch is used for loads exceeding the rated capacity, Camsco Electric Rainproof TB Series Time Switch IP-53 is imperative that time switch be used in combination with one more magnetic contactors according to each load.
• When the time switch is used with a heater, Camsco Electric Rainproof TB Series Time Switch IP-53 is imperative that the load circuit be protected by a thermo-switch.

Specifications

TB35-RP

• Rated Voltage : 110V AC / 220V AC
• Voltage Tolerance : 85-120V / 170-240V
• Frequency : 50/60Hz (selectable)
• Driving Method : Synchronous motor
• Cycle : 24 hours
• OUTPUT- Circuit Quantity : 1 circuit
• OUTPUT- Switch construction : SPST
• OUTPUT- Manual ON/OFF : ON/AUTO/OFF switch
• OUTPUT- Contact Capacity - Resistive load : 250V AC 20A
• OUTPUT- Contact Capacity - Incandescent lamp : 10A
• OUTPUT- Contact Capacity - Inductive (cosφ) ≧0.7 : 12A
• OUTPUT- Contact Capacity - Motor (cosφ) ≧0.7 : 110V AC 750W, 220V AC 1500W
• OPERATION TIME SETTING - Present time setting : Turn the Minute control knob in the center clock.
• OPERATION TIME SETTING - Minimum unit : 15 Minutes / Unit
• OPERATION TIME SETTING - Minimum interval : 15 Minutes
• OPERATION TIME SETTING – No. of ON/OFF operations : 96 operations
• Working reserve time : --
• Ambient temperature : -10℃ ~ +50℃

Another Article: Vibex™ LSV1 Vibrating Level Switch, Flocorp-Level Switches MM Namur Series Sick Magnetic Proximity Sensor LK18-DU30 Series Riko M18 Laser Photo Sensor W12L-2 series Sick Photoelectric Proximity Sensors EGE IGMH Series High Temperature Proximity Switches

TB35N-RP

• Rated Voltage : 100-240V AC
• Voltage Tolerance : 85-264 AC
• Frequency : 50/60Hz (common use)
• Driving Method : Quartz controlled stepping motor
• Cycle : 24 hours
• OUTPUT- Circuit Quantity : 1 circuit
• OUTPUT- Switch construction : SPST
• OUTPUT- Manual ON/OFF : ON/AUTO/OFF switch
• OUTPUT- Contact Capacity - Resistive load : 250V AC 15A
• OUTPUT- Contact Capacity - Incandescent lamp : 10A
• OUTPUT- Contact Capacity - Inductive (cosφ) ≧0.7 : 12A
• OUTPUT- Contact Capacity - Motor (cosφ) ≧0.7 : 110V AC 750W, 220V AC 1500W
• OPERATION TIME SETTING - Present time setting : Turn the Minute control knob in the center clock.
• OPERATION TIME SETTING - Minimum unit : 15 Minutes / Unit
• OPERATION TIME SETTING - Minimum interval : 15 Minutes
• OPERATION TIME SETTING – No. of ON/OFF operations : 96 operations
• Working reserve time : 100 hours
• Ambient temperature : -10℃ ~ +50℃

TB330-RP

• Rated Voltage : 100-240V AC
• Voltage Tolerance : 85-264 AC
• Frequency : 50/60Hz (common use)
• Driving Method : Quartz controlled stepping motor
• Cycle : 24 hours
• OUTPUT- Circuit Quantity : 1 circuit
• OUTPUT- Switch construction : SPST
• OUTPUT- Manual ON/OFF : ON /OFF switch
• OUTPUT- Contact Capacity - Resistive load : 250V AC 30A
• OUTPUT- Contact Capacity - Incandescent lamp : 25A
• OUTPUT- Contact Capacity - Inductive (cosφ) ≧0.7 : 12A
• OUTPUT- Contact Capacity - Motor (cosφ) ≧0.7 : 110V AC 1500W, 220V AC 3000W
• OPERATION TIME SETTING - Present time setting : Turn the Minute control knob in the center clock.
• OPERATION TIME SETTING - Minimum unit : 15 Minutes / Unit
• OPERATION TIME SETTING - Minimum interval : 30 Minutes
• OPERATION TIME SETTING – No. of ON/OFF operations : Standard 6 operations. Maximum 48 operations are possible.
• Working reserve time : 150 hours
• Ambient temperature : -10℃ ~ +50℃

Cautions

• For the first time, please charge battery first for till running (hear DI DA sound) before setting time.(TB35N-RP, TB330-RP only)
• To set the correct time, turn the dial in the direction of arrow (clockwise) and set the present time.
• Please observe the rated voltage and voltage tolerance of the time switches for adequate use.
• If the load capacity exceeds the rating, an electromagnetic switch is required.

Reference : camsco.com.tw