Bacharach ECA 450 Combustion Efficiency Analyzer

The ECA 450 is an industrial-grade analyzer ideal for professionals concerned about combustion efficiency, environmental compliance, or both. Accommodating up to seven sensors, simultaneous measurements, and calculated parameters are evaluated to ensure that industrial equipment is meeting environmental regulations while burning safely and efficiently.

The ECA 450 is designed for on-demand or semi-continuous sampling of industrial furnaces, boilers, and other industrial combustion equipment. It complies with regulations such as U.S. EPA test methods, EN 50379, CTM-030, and state/local protocols including SCAQMD.

Note: The ECA 450 calculates CO2 value based on other measured values during the combustion process. It does not measure CO2 directly.

FEATURES :

Measures up to 7 gases simultaneously  ( minimum O2 and CO )  , including NOx, SOx, and combustibles

Sensors are easily replaced or upgraded in the field

Rugged suitcase design with a large, easy-to-read display

Built-in printer for instant traceability and record-keeping

Specification :

Specification	Description
Power	Internal rechargeable battery or via supplied wall adapter
Run Time	8 hours minimum
Size (H x W x D)	13.5 x 18.5 x 9 in. (34.3 x 47.0 x 22.9 cm)
Weight	25 lb. (11.3 kg)
Fuels[1]	Natural gas, coal, oil 2/4/5/6, wood, kerosene, bagasse, propane, LPG, KOKS, LEG, biofuel
Operating Conditions	Analyzer: 32 to 104 °F (0 to 40 °C), 15 to 90% RH  (non-condensing), 1 ATM ± 10% Probe tip[2]: 1472 °F (800 °C) maximum, 10 inH2O  (25 bar) maximum draft
Warm-up Time	60 seconds
Memory	1000 locations
Communications	RS-232
Approvals	CE mark

^[1] Depending upon combustion equation type – see manual for details

^[2] For standard 12 in. probe, P/N 0024-3023

Measurement Ranges :

Measurement	Description
O2	0.1 to 20.9%
CO (H2 Compensated)	0 to 4,999 ppm
CO (High Range)	4,001 to 80,000 ppm
NO	0 to 3,500 ppm
NO2	0 to 500 ppm
SO2	0 to 4,000 ppm
Combustibles	0 to 5.00% (application dependent)
Stack Temperature	-4 to 2,400° F (-20 to 1,215° C)
Primary / Ambient Temperature	-4 to 999° F (-20 to 999° C)
Pressure / Draft	-27.7 to 27.7 inch

Calculated Ranges :

Measurement	Description
Combustion Efficiency	0.1 to 100%
Excess Air	1 to 250%
CO2	0 to fuel-dependent  maximum
NOx (NO + NO2)	0 to 4,000 ppm
NOx (Referenced to %O2)	0 to 17,000 ppm
CO (Referenced to %O2)	0 to 99,999 ppm
NO (Referenced to %O2)	0 to 14,900 ppm
NO2 (Referenced to %O2)	0 to 2,100 ppm
SOx (Referenced to %O2)	0 to 17,000 ppm

Accuracy :

Measurement	Description
O2	±0.3% O2 on the practical concentration of flue gas
Stack Temperature	±4°F from 32 to 255° F (±2°C from 0 to 124° C) ±6° F from 286 to 480° F (±3°C from 125 to 249° C) ±8° F from 481 to 752° F (±4°C from 250 to 400° C)
Primary / Ambient Air Temperature	±2° F from 32 to 212° F (±1° C from 0 to 100° C)
Pressure / Draft	±2% of reading or ± 0.02 inch, whichever is greater
CO	±5% of reading or ±10 ppm, whichever is greater than 0 to 2,000 ppm ±10% of reading from 2,001 to 4,000 ppm
NO	±5% of reading or ±5 ppm, whichever is greater than 0 to 2,000 ppm
NO2	±5% of reading or ±5 ppm, whichever is greater than 0 to 500 ppm
SO2	±5% of reading or ±10 ppm, whichever is greater than 0 to 2,000 ppm
HC	±5% of a full scale
Selectable Fuels	Natural Gas, Oil #2, 4, 5, 6, Propane, Coal, Wood, Kerosene, Bagasse

Model :

N. Amer. P/N	Description
0024-7221	ECA 450 with O2 and CO sensors and probe with 12 in. sample tube (approximately 15 ft. total length), water trap, particulate filter, and probe stop
0024-8400	ECA 450 with O2, CO, NOx kit (NO and NO2 sensors) and compact sample conditioner
0024-8401	ECA 450 with O2, CO, NOx & SOx kit (NO, NO2 and SO2 sensors) and compact sample conditioner

For further info please contact us, at marketing@wmablog.com

Reference: https://www.mybacharach.com/