Fcon CUBEGM Series Gas Mixer

Fcon CUBEGM Series Gas Mixer

Feature

  • [CUBEGM Seires] is an all-in-one unit that has a mass flow controller, control power supply, valve, check valve and gas mixer.
  • Simply connect the piping to the INside and OUTside.
  • [CUBEGM Series] is a device that supplies a mixed gas species of 2, 3, 4 to set up and control to any of the flow rates.
  • Analog mass flow controller [1000 Series] is mounted as a standard feature.
  • The mass flow controller, which flow control range is from 10SCCM to 50SLM, can be mounted as a standard. In other cases, please contact us.
  • It can be reduced the cost when you use a Gas mixer than you purchase gas cylinders that have been prepared in the mixing ratio.
  • It can be used for a wide range of applications such as analysis, environment, bio, packaging, medical, gas welding.
  • Applicable gases: Inert gas. (For more information, please contact us)

Another Article:

Specification

SizeCUBEGM2 : W315×D298×H250(mm) ※Except protrusion
CUBEGM3 : W415×D298×H250(mm) ※Except protrusion
CUBEGM4 : W515×D298×H250(mm) ※Except protrusion
Built-in MFCMFC1000 or FCST1000L (manufactured by Fujikin)
GasesMost gases (e.g., air, nitrogen, carbon dioxide, argon, hydrogen, helium, methane, oxygen)
Current consumptionMAX 1A ※In the case of 4 mass flow controllers equipped with
Flow range*10SCCM to 20SLM for one line (but the mixed gas flow of 50SLM or less)
Flow rate controlMFC : C1000 Series or FCST1000L Series
Flow rate output signals0-5VDC
Flow rate control range1 LINE: F.S.10SCCM~20SLM (However, the mixed gas flow rate must be less than 50 SLM)
Operating differential pressureConform to built-in mass flow controller specification
Pressure ResistanceConform to built-in mass flow controller specification
Operating environment5-50°C (Accuracy guaranteed between 15-35°C), 30-80% RH (No condensation permitted)
Leak Integrity1×10-7Pa・m3/sec (He)
Wetted surface materialSUS316, PTFE, Fluoro-Rubber and built-in mass flow controller material
(FCST1000L Series: Magnetic stainless steel, Fluoro-Rubber or Chloroprene rubber)
Standard Fitting**1/4in. SWL (equivalent), One-touch fittings
Inlet and outlet valvesBall valve
Mass flow control10-turn potentiometer
DisplayInstantaneous flow: 4 digits
Input powerAC85-264V
AccessoryAC cable(2m), User's manual, Written guarantee

* At FCON, flow rates (SCCM, SLM) are converted to values at 0ÂșC, 101.3kPa abs (1atm) for calibration. Please contact us regarding detailed specifications for the gas type and flow range.

** For other fittings, please contact us.

May be changed items depend on the number of the mass flow controllers. The other specifications, please contact us.

Data Sheet: Fcon CUBEGM Gas Mixer

Reference:http://www.fcon-inc.jp/

 

Berbagi:  

Komentar

Articles