Fluidwell F030 Batch Flow Control

 

The F030 is a straight forward but easy-to-use batch controller. The operator can easily enter a batch quantity or execute repeating batches. During the batch, the preset value is displayed as well as the batched or remaining quantity. The automatic self-learning overrun correction will ensure an accurate batch every time.

On-screen engineering units are easily configured from a comprehensive selection.

Advantages

• Robust aluminum or stainless steel 316L field enclosure (IP66, IP67 / NEMA Type4X) .
  It is so rugged, a truck can even stand on it!
• Intrinsically Safe available - ATEX, IECEx, FM and CSA approval for gas and dust applications.
• Familiar easy operation with the Fluidwell "Know one, know them all" configuration structure, saving time, cost and aggravation.
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.

Features

• Large display shows preset value and running batch value simultaneously.
• Self-learning overrun correction.
• One control output to drive a valve or pump.
• Easy operation to enter a batch value and to control the process.
• Count-up and count-down function available.
• LED backlight with adjustable intensity.
• Actual batched quantity: seven 17mm (0.67") digits.
• Preset value: seven 17mm (0.67") digits during programming and 8mm (0.31") digits during process .
• Total - resettable: seven 17mm (0.67") digits.
• Accumulated total - not resettable: eleven 8mm (0.31") digits.
• Selectable on-screen engineering units for total: ml, L, m³, GAL, USGAL, kg, lb, bbl or no unit.
• Intrinsically safe according ATEX, IECEx, FM and CSA C-US.
• GRP, Aluminum or high grade stainless steel enclosure.
• Auto backup of settings and running totals in EEPROM memory.
• Easy configuration with clear alphanumerical display.
• Ambient temperature: -40°C to +80°C (-40°F to 176°F).
• Various accessories are available for this product.

Applications

• For one stage batch applications at low or medium flow rates.
• The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, sandy deserts, salty atmospheres and temperatures between -40°C up to +80°C (-40°F up to 176°F).

Specification

Signal Inputs

• Flowmeter Inputs
  • Pulse-type inputs: Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.
  • (0)4-20mA.
• Status Inputs
  • None.

Signal Outputs

• Pulse outputs: None.
• Alarm outputs: None.
• Analog outputs: None.
• Control output
  • Function: Control output for one-stage batching with active overrun correction.
  • Type: Control output for one-stage batching with active overrun correction.

Supply

• Power Supply
  • Basic: 8 - 30V DC.
  • Long-life Lithium battery.
  • 4 – 20mA input Loop-powered.
  • 8 – 24V AC/DC.
  • 115 – 230V AC.
• Sensor Supply
  • 3.2, 8.2, 12, 24V DC.

Hazardous Area

• Intrinsically Safe
  • ATEX:
    Gas: II 1 G Ex ia IIC T4 Ga
    Dust: II 1 D Ex ia IIIC T100°C Da
  • IECEx:
    Gas: Ex ia IIC T4 Ga
    Dust: Ex ia IIIC T100°C Da
  • CSA:
    I.S. Class I/II/III, Div 1, Grp A...G, T4
    Class I, Zone 0, AEx ia IIC T4
  • FM:
    I.S. Class I/II/III, Div 1, Grp A...G, T4
    Class I, Zone 0, AEx ia IIC T4

Communication

• Modbus communication available on F1-Series products.
• HART communication is available with the F018 & E018 Flow rate Monitor / Totalizers.

Download Datasheet: Fluidwell F030 Batch Flow Control

For futher please contact us, sales@wmablog.com