Formalin Dispensingsystem FDS-760W

Closed system for storing and dispensing formaldehyde. The surfaces are completely made of stainless steel (material no. 1.4301 – ANSI 304) with a high surrounding profile border. Contaminated air is being vacuumed backward throughout the entire working area to guarantee optimal removal of unsanitary vapors. MAC (maximum allowable concentration) values are underscored throughout the entire vacuum-affected area. The dispensing system is to be connected to a site-mounted ventilation system provided by the customer. Below the working surface, there is room for a 20 liters formaldehyde tank.

 The integrated dispensing pump is controlled through a foot pedal
 The table has a formalin sink with a drain and removable sieve at the left side
 The right-hand tap is to be connected to the water supply or distilled water (aqua dest)
 The exhaust air duct (DN 200) is arranged on top of the unit
 Airspeed at the perforated surface: min. 0.4 m/sec
 formalin pump for dispensing variable quantities of formalin (0.5 liters to 1 liter/min.)
 Without doors for easy access to the formaldehyde tank

 Optionally with an active carbon filter in the airflow channel article no. 069.300.266
 Optionally with integrated exhaust air fan article no. 069.300.267

Technical Data

Dimensions W/D/H: 700 x 760 x 1800 mm
Dimensions sieve W/D/H: 150 x 150 x 100 mm
Exhaust air capacity: min. 250m³/h
Type: FDS-760W
Article No.: 069.300.204

tekequipment.com

For further information please contact: marketing@wmablog.com