HM Subsea Kem Kuppers Turbine Flow Meters

HM Subsea Kem Kuppers Turbine Flow Meters

The HM Turbine Flow Meters for Subsea Immersion Applications are reliable, durable and robust flow instruments, specifically developed for challenging subsea flow applications. They are primarily used in applications with low and medium viscosity liquids, such as seawater, glycol mixtures and various hydraulic fluids.

Only high-quality stainless steels, which even withstand corrosive liquids, are used in the production of our Turbine Flow Meters. In combination with tungsten carbide bearings, the HM Subsea Series guarantees an optimum measurement accuracy as well as an extremely long service life even under the toughest application conditions.

The variety of different turbine wheel dimensions and blade geometries allows a broad spectrum of sizes that can cover an enormous measuring range. This highly qualifies the HM Subsea Series for a variety of applications in the field of metering as well as for monitoring.

Short response times, very dynamic performance and high measuring accuracyensure accurate regulation and control of flow rates in the most demanding applications.



Well control

  • Blowout Prevention
  • Valve Actuation
  • Remotely Operated Vehicle
  • Wellhead Additives
  • Subsea Production System
  • Pipe Laying System
  • Water/Chemical Injection
  • Subsea Network


  • API 17F (ISO 13628-6)
  • High Resolution
  • Short Response Time
  • High Pressure Shock Resistance
  • Large Viscosity Range
  • NACE MR0175
  • Norsok Standard
  • Low Maintenance
  • PED 97/23/EC


Technical Data

  • Measuring Ranges: 0.3 up to 500 l/min
  • Measuring Accuracy: up to ±0.1 %
  • Repeatability: ±0.05 % (under the same conditions)
  • Linearity: ±1 % of actual flow
  • Measuring Span:
    • Standard: 1:10
    • Extended: 1:100
  • Viscosity Range: 0.8 up to 30 mm²/s
  • Materials:
    • Housing: as per 1.4404 [AISI 316L] (others on request)
    • Wheels: as per DIN 1.4460 [AISI 329] (others on request)
    • Bearing: Tungsten carbide sleeve bearing
  • Pressure: up to 1,400 bar [20,300 psi]
  • Medium Temperature: -40 °C up to +60 °C [-40 °F up to +140 °F]

Download Datasheet: HM Subsea Kem Kuppers Turbine Flow Meters

Reference :

Another Article: