Omron Terminal Relay G6D-F4PU / G3DZ-F4PU, G6D-F4B / G3DZ-F4B

 

Jenis relay dengan Model teknologi Push-In Plus yang Ditambahkan ke Terminal Relays dengan Lineup Output empat titik

• Realisasi 5 Peringkat dengan desain optimal untuk berbagai aplikasi (teknologi Push-In Plus).
• Terminal Push-In Plus memungkinkan pengurangan kerja dan tidak memerlukan pengetatan ulang.
• Batang Pendek (dipesan terpisah) memastikan pemasangan kabel yang umum dan crossover yang mudah ke relai terminal yang berdekatan.
• Metode kawat ganda memungkinkan kabel cabang (teknologi Push-In Plus)
• Setiap relai memiliki kumparan dan kontak independen untuk kompatibel dengan output PLC (baik NPN dan PNP).
• Model Relai Mekanik dan model relai daya MOS FET (untuk peringkat kontak frekuensi tinggi) tersedia.
• Indikator operasi LED, dioda untuk penyerapan lonjakan kumparan, dan alat untuk melepaskan relay dengan mudah dimasukkan sebagai peralatan standar.
• Sertifikasi UL dan CSA untuk model standar.
• Sertifikasi VDE untuk terminal Screws, sertifikasi TÜV untuk terminal Push-In Plus.
• Kode perlindungan IP20 untuk model Push-In Plus.

Baca juga: Matsushima-Magnetic Type Speed Relay

Spesifikasi Relai

Coil Ratings (per G6D Relay)

Operation coil rating		Nilai Arus (mA)	Ketahanan Koil (Ω)	Operasi Voltage Wajib (V)	Lepas Voltage Wajib (V)	Max. voltage (V)	Konsumsi Daya (mW)
DC	12	18.7	720	70% max.*	10% min.	130%	Approx. 200
	24	10.5	2,880

Note :

• Nilai arus dan resistansi koil diukur pada suhu koil 23 ° C dengan toleransi ± 20%.
• Data karakteristik kinerja diukur pada suhu kumparan 23 ° C.
• Tegangan maksimum yang diijinkan adalah nilai maksimum dari tegangan operasi untuk catu daya operasi koil relay.
• Arus pengenal termasuk arus LED terminal.* Tegangan yang harus dioperasikan adalah 75% atau kurang dari nilai tegangan jika relai dipasang terbalik.

Contact Ratings (per G6D Relay)

Model	G6D-F4PU	G6D-F4B
Different	The model with Push-In Plus technology	A model with Screw terminal
Beban	Resistive load (cosφ = 1)
Nilai Beban	5 An at 250 VAC, 5 A at 30 VDC	3 An at 250 VAC, 3 A at 30 VDC
Rated carry current	5 A
Max. switching voltage	250 VAC, 30 VDC
Max. switching current	5 A
Max. switching capacity (reference value)	1,250 VA, 150 W

Characteristics

Model		G6D-F4PU	G6D-F4B
		Relay output
Contact resistance *1		100 mΩ max.
Operate time *2		10 ms max.
Release time *2		10 ms max.
Insulation resistance		1,000 MΩ min. (at 500 VDC)
Dielectric strength	Between coil and contacts	2,000 VAC, 50/60 Hz for 1 min
	Between contacts of the same polarity	750 VAC, 50/60 Hz for 1 min
Shock resistance voltage (between coil and contacts)		4,000 V (1.2 × 50 μs)
Vibration resistance	Destruction	10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
	Malfunction	10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance	Destruction	500 m/s2
	Malfunction	100 m/s2
Endurance	Mechanical	20,000,000 operations min. (switching frequency: 18,000 operations/hr)
	Electrical *2	70,000 operations min. (5 A at 250 VAC, resistive load) 70,000 operations min. (5 A at 30 VDC, resistive load) (at 1,800 switching frequencies/hr)	200,000 operations min. (3 A at 250 VAC, resistive load) 200,000 operations min. (3 A at 30 VDC, resistive load) (at 1,800 switching frequencies/hr)
Failure rate P Level (reference value *3)		10 mA at 5 VDC
Ambient operating temperature, Ambient storage temperature		-25 to 55°C (with no icing)
Ambient operating humidity		45% to 85%
LED color		Yellow
Sealing		IP20	---
Weight		Approx. 95 g	Approx. 65 g

Note: The data shown above are initial values.
*1. Measurement condition: 1 A at 5 VDC
*2. Ambient temperature condition: 23°C
*3. This value is measured at 120 switching frequencies/min.

Power MOS FET Relay Specifications

Input (per G3DZ Power MOS FET Relay)

Rated voltage		Operating voltage	Must operate voltage level	Must release voltage level	Input impedance	Rated current
DC	12	9.6 to 14.4 VDC	9.6 VDC max.	1 VDC min.	2 kΩ ±20%	8.0 mA ±20%
	24	19.2 to 28.8 VDC	19.2 VDC max.		4 kΩ ±20%	8.2 mA ±20%

Note: The rated current includes the terminal’s LED current.

Output (per G3DZ Power MOS FET Relay)

Rated operating voltage	Load voltage range	Load current	Inrush current resistance
5 to 240 VAC 5 to 100 VDC	3 to 264 VAC 3 to 125 VDC	100 μ to 0.3 A	6 A (10 ms)

Note: There is no output polarity for the G3DZ.

Characteristics

Model	G3DZ-F4PU (Model with Push-In Plus technology)	G3DZ-F4B (Model with Screw terminal)
	Power MOS FET relay output	Power MOS FET relay output
Must operate-time	10 ms max.
Release time	15 ms max.
Output ON-resistance	2.4 Ω max.
Leakage current at OFF state	10 μA max. (at 125 VDC)
Insulation resistance	100 MΩ min. (at 500 VDC)
Dielectric strength between I/O	2,000 VAC, 50/60 Hz for 1 min
Vibration resistance	10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude)
Shock resistance	500 m/s2
Ambient operating temperature, Ambient storage temperature	-25 to 55°C (with no icing)
Ambient operating humidity	45% to 85%
LED color	Yellow
Sealing	IP20	---
Weight	Approx. 95 g	Approx. 65 g

Ratings for Safety Standard Certification

The rated values for safety standard certification are not the same as individually defined performance values. Always check the specifications before use.

G6D-F4PU/G3DZ-F4PU

UL-certified Models (File No. E41515)

Model	Standard number	Category	Listed/ Recognition Classification	Operating coil ratings	N0 of poles	Contact ratings	Certified number of operations
G6D-F4PU	UL508	NRNT/7	Listed	12 VDC 24 VDC	4	Rated load voltage 250 VAC 30 VDCLoad Current, General Use and Resistive 5 An at 40°C	Mechanical 20,000,000 operations min. (at 18,000 switching frequencies/hr)Electrical 70,000 operations (5 A at 250 VAC, resistive load) 70,000 operations (5 A at 30 VDC, resistive load) (at 1,800 switching frequencies/hr)
G3DZ-F4PU						Rated load voltage 5-240 VAC 5-100 VDCLoad Current, General Use and Resistive 0.3 A at 55°C	---
P6DF-F4PU		SWIV2	Recognition			Contact terminal 5 A, 250 V	---

CSA-certified Models (File No. LR35535)

Model	Standard number	Class number	Operating coil ratings	Number of poles	Contact ratings	Certified number of operations
P6DF-F4PU	C22.2 NO. 14	CLASS 3211 07 CLASS 3211 87	12 VDC 24 VDC	4	Contact terminal 5 A, 250 V	---

TÜV Rheinland Certification

Model	Operating Coil ratings	Number of poles	Contact ratings	Certified number of operations	Certification No.
G6D-F4PU	12 VDC 24 VDC	4	Rated load voltage 250 VAC 30 VDCLoad Current, General Use and Resistive 5 An at 40°C	Mechanical 1,000,000 operations (at 18,000 switching frequencies/hr)Electrical 70,000 operations (5 A at 250 VAC, resistive load) 70,000 operations (5 A at 30 VDC, resistive load) (at 1,800 switching frequencies/hr)	R50429253
G3DZ-F4PU			Rated load voltage 5-240 VAC 5-100 VDC Load Current, General Use and Resistive 0.3 A at 55°C	---	R50429249
P6DF-F4PU	12 VDC 24 VDC	4	12 VDC 24 VDC	---	50429224

G6D-F4B/G3DZ-F4B

UL-certified Models (File No. E87929)

Model	Standard number	Category	Listed/ Recognition Classification	Operating coil ratings	Number of poles	Contact ratings	Certified number of operations
G6D-F4B	UL508	SWIV2	Recognition	12 VDC 24 VDC	4	Rated load voltage 250 VAC 30 VDCLoad Current 5 A Resistive	---
G3DZ-F4B						Rated load voltage 3-264 VAC 3-125 VDCLoad Current 0.3 A	---

CSA-certified Models (File No. LR35535)

Model	Standard number	Class number	Operating coil ratings	Number of poles	Contact ratings	Certified number of operations
G6D-F4B	C22.2 NO. 14	CLASS 3211 07 CLASS 3211 87	12 VDC 24 VDC	4	Rated load voltage 250 VAC 30 VDCLoad Current 5 A Resistive	---
G3DZ-F4B					Rated load voltage 3-264 VAC 3-125 VDCLoad Current 0.3 A, Resistive	---

VDE Certification

Model	Operating coil ratings	Number of poles	Contact ratings	Certified number of operations	Certification No.
G6D-F4B	12 VDC 24 VDC	4	Rated load voltage 250 VAC 24 VDCLoad Current 3 A	---	40017757
G3DZ-F4B	12 VDC 24 VDC	4	Rated load voltage 5-240 VAC 5-100 VDC Load Current 0.3 A	---	40046252
P6DF-F4B	12 VDC 24 VDC	4	Rated load voltage 250 VACLoad Current 0.3 A	---	40046241

Visit Wiratama-ma for more info