TE CD1050 Dynamic Rotary Torquemeter

The CD1050 Series has been developed to be mounted on rotating shafts for rotary torque measurements. Constructed in stainless steel, the sensor is suitable for use in many hostile environments. Fitted with metallic strain gauges in a Wheatstone bridge circuit, the CD1050 is providing excellent temperature stability. For high-level output a model with integrated amplifier is available. Another version with key-shafted interface exists under the reference CD1095. With many years of experience as a designer and manufacturer of sensors, TE CONNECTIVITY often works with customers to design or customize sensors for specific uses and testing environments. On request, Instruction documents can be provided to ease the selection and use of our sensors and provide helpful tips.

Feature

• Slip ring measurement peaking
• High Stiffness
• Other square size available on custom design
• High Level Output Model with Integrated Amplifier

Application

• Dynamic applications
• Process control equipment
• Test and Measurement
• Robotics and effectors
• Laboratory and Research

Specification

Range

F.S range in Nm	5 - 10- 20 - 50 - 10	150 - 200 - 300	500 - 750	1k – 2k – 3k	4k – 5k – 7
F.S range in lbf-ft	4 - 8 - 16 - 40 - 80	120 - 160 - 240	400 - 600	800 – 1,6k – 2,4k	3,2k – 4k – 5,6k
Stiffness in Nm/rad	1,4.10² to 7,5.10³	7,5.10³ to 3.104	3.104 to 1.105	1.105 to 4,5.105	4,5.105 to 1,3.106
Stiffness in lbf.ft/rad	0,1.102 to 5,1.102	5,1.102 to 2,1.103	2,1.103 to 6,9.103	6,9.103 to 3,1.104	3,1.104 to 8,9.104
Rotation in rpm	3000	2200	1750	1250	1000

Performance

Parameters
Operating Temperature Range (OTR)	-20 to 80º C (-4 to 176° F)
Compensated Temperature Range (CTR)	0 to 60º C (32 to 140° F)
Zero Shift in CTR	<0.5% F.S./ 50º C [/100° F]
Zero Shift in CTR	<1% of reading / 50° C [/100° F]
Range (F.S.)	±5 Nm to ±7 kNm [4 lbf-ft to 5,6 klbf-ft]
Velocity of Rotation	Up to 3000 RPM ; Bidirectional operation
Over-Range
Without damage	1.5 x F.S.
Without destruction	3 x F.S.
Accuracy
Combined Non-Linearity & Hysteresis	<±0.25% F.S

Electrical Characteristics

Model	CD10501	CD1050-A1	CD1050-A2
Supply Voltage	1 to 10Vdc regulated	10 – 30Vdc	±15Vdc (±12 to ±18Vdc)
Sensitivity “FSO”2	±2mV/V	±2V ±0.2V	±5V ±0.2V
Zero Offset2	<±1mV	2.5V ±0.2V	0V ±0.2V
Input Impedance/Consumption	350 to 700Ω	<50mA	<50mA
Output Impedance	350 to 700Ω	1 kΩ6	1 kΩ6
Insulation under 50Vdc	≥100MΩ	≥100MΩ	≥100MΩ

Notes
1. Sensors are calibrated with 10Vdc power supply as standard.
2. Signal goes positive in CW strain with standard wiring configuration. Other signal output on request
3. Electrical Termination: Connector output including mating plug
4. Material: Body in stainless steel ; aluminum alloy housing.
5. Other connection types on request (smooth shaft, cotter pin, etc.)
6. Output impedance < 100Ω on request
7. CE conformance according to EN 61010-1, EN 50081-1, EN 50082-1

Download Datasheet: TE CD1050 Dynamic Rotary Torquemeter

For futher please contact us, sales@wmablog.com