TE KPSI 705 Submersible Hydrostatic Level Transducer

The KPSI 705 is a submersible hydrostatic level transducer specifically designed to meet the adverse environments encountered in wastewater applications. This suitably-sized transducer features a wide sensing area comprised of a PTFE-coated elastomeric diaphragm for reliable operation in highly viscous or slurry environments.

All KPSI Transducers utilize a highly accurate pressure sensor assembly. The assembly is integrated with supporting electronics in durable waterproof housing constructed of 316 stainless steel or titanium.

 The attached polyurethane or ETFE electrical cable is custom manufactured to specifications and includes para-aramid synthetic fiber members to prevent errors due to cable elongation, and a unique water blocks feature that self-seals in the event of accidental cuts to the cable. Each vented reference transducer is shipped with our latest Superdry Vent Filter that prevents moisture from entering the vent tube for at least one year without maintenance, even in the most humid environment.

Features :

• Custom polyurethane or ETFE cable lengths
• Welded 316SS or titanium body
• Custom level ranges up to 115 ft. (35 m) H2O
• PTFE-coated elastomeric diaphragm
• Optional lifetime lightning protection
• Available molded cable seal

Applications :

• Lift stations
• Wastewater
• Slurry Tanks
• Pump control

Specification :

PARAMETER		Comment
LEVEL RANGES
Full-scale level ranges (Intermediate-level ranges are available)	6 thru 115 ft. H20 (2 thru 35 m H20) 10 thru 115 ft. H20 (3 thru 35 m H20)	Vented Gage Reference Sealed Gage Reference
Proof pressure	1.5 x FS
Burst pressure	2.0 x FS
STATIC PERFORMANCE
Static Accuracy (combined effects of non-linearity, hysteresis and repeatability, best fit straight-line method)	±0.25% FSO	BFSL method
Resolution	±0.0001% FS
ELECTRICAL
Excitation	9-28V – VDC output 9-28V – mA output 15-28V – VDC output 10-28V – VDC output	0-5V, 0-2.5V, 0-4V 4-20 0-10V 1.5-7.5V
Input current	20 mA max 3.5 mA max	For mA output For VDC output
Output	4-20mA, 0-5 VDC, 0-2.5VDC, 0-4VDC, 0-10VDC, 1.5-7.5VDC
Zero Offset	Rezero after installation for optimum accuracy.      Span is not affected (See application note on website)
Output Impedance	See the loop diagram for the mA output 20 ohm for VDC output
Insulation Resistance	100 mega-ohm at 50 VDC
Circuit Protection	Polarity, surge/shorted output
PHYSICAL
Approximate Weight	0.5 lbs. (227 g) transducer 0.05 lbs./ft. (79 g/m) cable
Cable jacket material	Polyurethane (standard) ETFE (optional)
Cable pull strength	200 lbs. (90 kg)
Cable number of conductors	4
Cable conductor size	22 AWG
Cable seal	Molded polyurethane FKM Gland	For polyurethane cable For ETFE cable

Download Datasheet: TE Connectivity KPSI 705 Submersible Level Transducer

For further info please contact us, at marketing@wmablog.com