Tokyo Keiki Flat Radar Level Sensor MRF-10

Radar Level Sensor MRF-10

Features :

The Tokyo Keiki Flat Radar Level Sensor  MRF-10 is a loop-powered radar level gauge, which can be installed easily in a variety of applications. The MRF-10 employs a non-contact radar level gauging principle based on pulsed microwave signals and is suitable for level measurement in applications such as liquids, pastes, and slurries.

Tokyo Keiki Flat Radar Level Sensor MRF-10 uses a 5.8GHz low-power pulsed microwave. It provides good measurement stability because the propagation of microwaves is less affected by a change in temperature, pressure, or gas conditions in the tank.

1. IP68 submergible
   Stormwater will not break MRF-10 under the water.
   
   
2. Compact body (Height: 54mm)
   Height: 54mm, easy installation for narrow spaces like under the Manhole
   
   
3. Loop-Powered
   Easy replacement to existing Loop-powered instrumentations
   
   
4. HART communication
   HART protocol has been superimposed onto the analog output
   
   
5. Easy Configuration
   Graphical PC software by HART
   
   
6. Simple one-piece structure
   No independent main console required

Specifications :

General :	Measuring principle :		Time of Flight Impulse Radar Technology
	Operating frequency :		5.8GHz
	Half power beam angle :			Lengthwise: 50°/ Crosswise: 23°
	Display /Configuration :		No display / Graphical PC Configuration is available
Electrical :	Power supply :		Loop-powered 16 ~ 36V DC
	Output :		Analog: 4-20mA + Digital: HART Protocol
	Output variable :		Level,  Ullage (m or ft), Volume(%), Amplitude (dB)
	A signal on alarm :		Hold, Low (3.9mA), High (22mA)
	Others :	Arrester and 10m shielded twisted 3 - cores Cable are built-in.
Mechanical :	Housing (Enclosure) :	Body: Casting stainless steel (316 equivalent)/Antenna face: FRP
	Size :		172 x 192 x 54mm (without Cable gland)
	Mass :		Approx. 2.7kg (without Cable)
Environment :	Ambient temperature :		-20℃ ~ 70℃ (-4°F ~ 158°F)
	Ambient pressure :		ATM
	Protection degree :		IEC 60529 IP68 (10m Depth /24hr.)
Measuring Performance :	Accuracy :		±5mm (0.1 - 5m range) ±10mm (5 - 10m range)
	Repeatability :		±1mm
	Update interval :		1sec
	Measuring range :		Up to 10m Max. Applicable circular channel: more than φ400mm