Ultra 3 Pulsar's Ultrasonic Measurement

Ultra 3 provides reliable non-contacting ultrasonic level, volume, open channel flow measurement and pump control. The Ultra 3 controller benefits from Pulsar's DATEM, advanced echo processing software, for reliable level measurement.

Available in 4 different versions to suit your installation requirements.

Another Article: IMP Lite Pulsar Level Measurement IMP+ I.S. Pulsar ATEX Level Sensor IMP+ Pulsar Ultrasonic Level Sensor Ultrasonic Liquid Level Switch 003 Series Delta Mobrey Ultra 4 Pulsar Non-contacting Ultrasonic Level Control and Flow Measurement

Features

• 3 relays
• IP64 or IP65 depending on mounting option chosen
• Easy menu driven set-up - see Ultra Wizard section below

Specifications

Physical

Mounting option:	Wall Mount	Fascia Mount	Rack Mount	Panel Mount
Sensor body dimensions:	188 x 160 x 107mm (7.4 x 6.3 x 4.2in)	200 x 112 x 108mm (7.87 x 4.4 x 4.25in)	10HP x 160Dmm x 3U (128.5Hmm)	72W x 144H x 176Dmm
Sensor body weight:	Nominal 1kg (2.2lbs)	Nominal 1.3kg (2.86lbs)	Nom. 0.8kg (1.7lbs)	Nom.1.4kg (3lbs)
Enclosure material/description:	Polycarbonate, flame resistant to UL91	Stainless steel back, Polycarbonate UL94-V0 front and bezel	Aluminium frame	ABS
Cable entry detail:	8 cable entry knock outs 1 x M16, 3x M20 underside 4 x 18mm dia (PG11) at rear	8 cable entry knock outs 1 x M16, 3x M20 underside 4 x 18mm dia (PG11) at rear	N/A	N/A
Enclosure protection:	IP65	IP64	None	IP65 optional

(All Mounting Options)

Physical

Transducer cable extensions:	2-core screened
Maximum separation:	Up to 1000m (3280ft)

Environmental

Max. and min. temperature (electronics):

-20°C to +50°C (-4°F to +120°F)

Approvals

CE approval:	Listed in the Certificate of Conformity within the manual
Flammable atmosphere approval:	Safe area: compatible with approved dB transducers

Performance

Accuracy/Repeability:	0.25% of the measured range or 6mm (whichever is greater)
Resolution:	0.1% of the measured range or 2mm (whichever is greater)
Min. & max. range:	0 - 40m (131ft). Dependent on sensor used. Ability to measure 50m (164ft) with dB50 when modified.
Rate response:	Fully adjustable
Echo processing:	DATEM (Digital Adaptive Tracking of Echo Movement)

Output

Analogue output:	Isolated (floating) output (to 150V) of 4-20mA or 0-20mA into 500Ω (user programmable and adjustable) 0.1% resolution
Digital output:	Full Duplex RS232
Volt free contacts, number & rating:	3 form “C” (SPDT) rated at 5A at 240Vac
Display:	6 digits plus 12 character text, plus bargraph with direction indicators, remote communicator identifier and program/run/test mode indicators

Programming

On-board programming:	By integral keypad
PC programming:	Via RS232
Programming security:	Via passcode (user selectable and adjustable)
Programmed data integrity:	Via non-volatile RAM, plus backup

Supply

Power supply:	115Vac +5% / -10% 50/60Hz, 230Vac +5% / -10% 50/60Hz, 18-30Vdc, 10W maximum power (typically 6W)
Fuses:	100mA at 170-240Vac, 200mA at 85-120Vac

Download Datasheet: Ultra 3 Pulsar's Ultrasonic Measurement

Reference : www.pulsar-pm.com