Seametrics PS40 Pulse Splitter

It requires an external DC power supply for operation and can provide power to a single low-power Seametrics flow sensor, such as an MJE meter.

It can also be used with a dry contact sensor, such as the MJR reed switch meter.

The PS40 is a low-voltage device that allows a Seametrics flow sensor to drive multiple (up to four) pulse-responsive devices, such as solenoid-driven chemical metering pumps, counter-timers, or remote totalizers.

It requires an external DC power supply for operation and can provide
power to a single low-power Seametrics flow sensor, such as an MJE meter.
It can also be used with a dry contact sensor, such as the MJR reed switch meter.

Feature :

• Rugged ABS plastic housing
• Optoisolated Transistor and relay outputs
• Allows a single meter to operate multiple devices
• Ideal for pacing multiple metering pumps

Application :

• Cooling tower/boiler water treatment
• Pacing chemical metering pumps
• Driving multiple pumps, counter timers, and remote totalizers

Specification :

Power End	: 10–32 Vdc
Relay	: Operational frequency = 50 Hz max : Contacts = 250 mA max, 36 Vdc max, 3 W max.
Optoisolation	: 10 mA max @ 30 Vdc max
Outputs	: Three open collectors optoisolatedOne Form C relay
Environmental	: NEMA 4X, IP66

* Specifications are subject to change. Please consult our website for current data. Please consult our website for current data (seametrics.com).

Dimension :

For further please contact us, at marketing@wmablog.com