Aplisens Magnetic level switch ERH-xx-20

APLISENS S.A. is one of the leading manufacturers of high-quality process instrumentation. The company was founded in 1992. The main factory and headquarters are located in Warsaw. From the beginning, it has concentrated on electronic pressure and differential pressure measurement technology. The basic rules have always been: high quality, high flexibility, and competent support to customers.

Level signaling of the medium having a minimum density of 3 0,70 g/cm. The basic version, mounted from the top, is available with a 92x92mm flange connector, a head made from aluminum alloy, and an M20x1,5 cable gland with casing

protection degree IP68. Other versions of a mechanic or threaded flange connectors according to the ordering

code. There is also a possibility of ordering the level switch with connector according to the requirements, e. g. with

flange acc. to DIN or ANSI standard. The level switch can also be ordered in a version fully made from acidproof steel,

with additional cover protecting the float, made from stainless steel, with additional cover protecting the float, as

well as with certified cable of optional length. The level switch has DNV GLMarine approval.

Another Article: Paddle Level Switch PLS Series Delta Mobrey Ultrasonic Liquid Level Switch 003 Series Delta Mobrey Kobold Float-type Flowmeters/Switches Pulsarpoint 300 Pulsar Rotating Paddle Switch Pulsarpoint 310 Pulsar Rotating Paddle Switch

Technical Data

• Min. medium density: 0,70 g/c
• Max. process pressure: 1,0 MPa
• Ambient temperature: -25°C…+ 60°C
• Medium temperature: -25°C…+ 80°C
• Switching points: 1,2 or 3
• Switching rate:
  • 230 V AC; 100VA; 1A
  • 230 V DC; 50W; 0,5A
• Hysteresis: 10mm
• Ingress Protection: IP68
• The material of the wet part: 316L
• The material of the dry part: aluminum alloy or 316
• Floating element: Ø40x35mm
• Protection tube: Ø60
• Weight of the level switch: ** 0,3...8,5 kg
• Weight of the cable 0,15 kg/m

* maximum parameters of the reed relays apply to loads of resistance character; for inductive loads such as relay coils, one should apply adequate protecting systems (detailed pieces of information in Operation Manual)

** it depends on the version

Download Datasheet: Aplisens Magnetic level switch ERH-xx-20

Reference: aplisens.com