Bamo Resistive Level Probes STS

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centering on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader in the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own product range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Resistive Level Probes STS

The STS level probe with a relay ES 2001, detects a level of a conductive liquid. The longest electrode is used as a reference. The electrical contact occurs when the reference electrode and another electrode are both in contact with the liquid. Then, the current in the detection loop provokes through the relay ES2001, an amplified ON/OFF signal.

Acid-resistant materials: With Hastelloy G30 electrode ends and PVC or PVDF stems, the STS probes are useful for level control of most acids. Other electrode ends such as Tantalum, other stem materials (PTFE or PPH), are available on request.

Features

• For aggressive and conductive chemicals
• PVC or PVDF
• Up to 5 electrodes
• Custom manufacturing
• Fixed alarming level

Application

Level control of electrically conductive and corrosive liquids

• Metal finishing industry
• Control of presence or absence of liquid (leak detection, empty piping, etc.)
• Pump automation (fill or drain) with ES 2001 relay

Another Article: Hengesbach Level Module for Installation in Level Probes Type NM Takuwa Water Level Gauge Sensor Mac3 Float Level Switch Hengesbach Level Module NC1 Series Mechatronics Dizzi Fluid Level Sensor

Specification

Type	STS/A	STS/Z	STS/D	STS/V	STS/F
Number of electrodes	1	2	3	4	5
BSP fitting	¾"	2"	2"	2"	2" ½
Flange PN 10	ND 25	ND 65	ND 65	ND 65	ND 80
Min. length (L in mm)	50	70	70	70	70
Max. length (in mm)	3000
Temperature	See corrosion table
Max. Pressure	4 bar at 20 °C
Head housing	In PBT, IP 65
MATERIALS
Electrode	Hastelloy G30
Stem and fitting	PVC (max. 55 °C for water)
	PVDF (Max. 110 °C for water)

Download Data Sheet: Resistive Level Probes STS

Ref: bamo.eu