Bamo Turbidity Underwater Settled


Bamo Turbidity Underwater Settled
Bamo Turbidity Underwater Settled[/caption]

Bamo Measures Sas has been founded in 1978. Its capital is now 400 000 Euros. Since the beginning, the company has undergone a rapid development centring on industrial pH-meters and conductivity meters. Bamo is now well-known as a leader on the French market.

Since 1990, new developments in the Level Measure have given a new spring in the export. To its own production range, the company holds numerous agencies of foreign companies in Europe and all over the world. So we are offering a complete line with always the best possible service.

Bamo is a company that comes from France. This company selling some product. The product of Bamo such as pH and ORP; Chlorine, disinfection; Data processors; Conductivity; Water hardness; Turbidity; Oxygen; Level; Temperature; Flow; Pressure; Plastic valves; Metal valves.

Bamo Turbidity Underwater Settled | Solids Detector MUDSonic

A complete system includes a MUDSonic TS immersion probe and a MUDSONIC MF operating unit. The detection is done between emitter and receiver of ultrasonic waves. The probe evaluates the concentration of solid particles by attenuation of the signal. The probe is immersed at a fixed height in the tank; It triggers a switch when the concentration (predefined) is reached (sludge level rising by settlement). The trigger point and timer are adjustable on site (real operating conditions).


  • Detection of settled solid particles in water
  • Level monitoring with ultrasonic detector
  • Output: 2 limit contacts, 1 fault contact
  • Adjustable timer
  • Adjustment along 3 measuring ranges (For sludge densities within 50 to 250 g/l )


  • Iron filings detection
  • Salt detection in brine tank
  • Sludge height monitoring in: Thickeners Primary clarifiers Industrial processes (sludges with iron hydroxide, high density slurry, etc.)

Another Article:


Operating unit MUDSonic MF

Power supply100 to 255 V AC - 50/60 Hz (model MF G) or
 10 to 30 V DC and 12 to 24 V AC (model MF D)
Ambient temperature-10 … +45 °C
Relay outputs2 contacts, 1 threshold, potential-free (N.O.)
 (Limit exceeded, below the limit)
 1 potential-free contact, fault alarm (N.O.)
When the supply voltage is off or in case of power failure, all contacts are open.
Switching power250 V AC, 3A / 30 V DC, 1 A
Caution: The contacts are not protected against overload.
Display:2½ digit LED, 5x7 dot matrix display
 1 Blue LED, relay energized
 3 Yellow LEDs, measuring range (LOW / Medium / HIGH)
Settings:Through a rotary switch on front
Delay:Adjustable from 0.1 up to 9.9 s

Probe MUDSonic TS

Detector material:PVC
Cable:TPK, 10 m long, shielded, 2 x1 mm²
 Other cable materials and lengths request ( PVC, oil and hydrocarbons-proof, etc.).
 (Max. length 50 m)
Dimensions145 x 90 x 25 mm
Protection:IP 68 acc. EN 60529
Measuring principle:Ultrasonic signal attenuation
Operating temperature-20 ... +45 °C


Contact us : or visit to our E-Commerce

Download Data Sheet: Turbidity Underwater Settled Solids Detector MUDSonic