E2C-EDA, Omron-High Precision Positioning Inductive Proximity Sensor

  

Features

• Wide variety of Sensor Heads to select according to the application. Flexible cables are used between Preamplifiers and Amplifier Units of the Sensor Heads.
• High resistance to changes in ambient temperature. Temperature characteristics of 08%/°C (for 5.4-dia. models).
• Make simple and reliable detection settings with micron- level precision using the teaching
• Check the sensing excess gain level on the digital
• Support for high-precision positioning and screening with fine positioning to maximize
• The E2C-EDA0 supports an EtherCAT Sensor Communications Unit or CompoNet Sensor Communications

Ratings and Specifications

Model Item			E2C-EDR6-F	E2C-ED01(-@)	E2C-ED02(-@)	E2C-EM02(-@)	E2C-EM07(-@)	E2C-EV05(-@)	E2C-EM02H
			3 dia. ´ 18 mm	5.4 dia. ´ 18 mm	8 dia. ´ 22 mm	M10 ´ 22 mm	M18 ´ 46.3 mm	30 ´ 14 ´ 4.8 mm	M12 ´ 22 mm
Sensing distance			0.6 mm	1 mm	2 mm		7 mm	5 mm	2 mm
Sensing object			Magnetic metal (The sensing distance will decrease when sensing non-magnetic metal. Refer to Engineering Data (Reference Value) on page 6.)
Standard sensing object			5 ´ 5 ´ 3 mm		10 ´ 10 ´ 3 mm		22 ´ 22 ´ 3 mm	15 ´ 15 ´ 3 mm	20 ´ 20 ´ 3 mm
			Material: iron (S50C)
Repeat accuracy *1			1 mm		2 mm		5 mm	2 mm
Hysteresis distance			Variable
Tempera- ture char- acteristic *1	Sensor Head		0.3%/°C	0.08%/°C				0.04%/°C	0.2%/°C
	Preamplifier and Amplifier		0.08%/°C
Ambient tempera- ture *2	Operating		–10°C to 60°C (with no icing or condensation)						–10°C to 200°C *3
	Storage		–10°C to 60°C (with no icing or condensation)	–20°C to 70°C (with no icing or condensation)
Ambient humidity			Operating/storage: 35% to 85% (with no condensation)
Insulation resistance			50 MÙ min. (at 500 VDC)
Dielectric strength			1,000 VAC at 50/60 Hz for 1 min between current carry parts and case
Vibration resistance			Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance			Destruction: 500 m/s2 for 3 times each in X, Y, and Z directions
Degree of protection			IEC60529 IP67						IEC60529 IP60 *4
Connection method			Connector (standard cable length: 2.5 m (2 m between Head and Preamplifier) “-F” model cable length: 3.5 m (0.5 m between Head and Preamplifier)
Weight (packed state)			Approx. 120 g (Models with protective spiral tube (“-S” models) are approx. 90 g heavier.)
Material	Sensor Head	Case	Brass	Stainless steel	Brass			Zinc	Brass
		Sensing surface	Heat-resistant ABS						PEEK
		Clamping nut	---			Nickel-plated brass		---	Nickel-plated brass
		Toothed washer	---			Zinc-plated iron		---	Zinc-plated iron
	Preamplifier		PES
Accessories			Preamplifier Mounting Brackets, Instruction Manual

Download Catalog: High Precision Positioning Inductive Proximity Sensor E2CEDA

Ref: Omron.co.id