E2EZ, Omron-Chip-immune Inductive Proximity Sensor

 E2EZ, Omron-Chip-immune Inductive Proximity Sensor

These Proximity Sensors use high-frequency oscillation. They resist heat, chemicals, and water better than Rectangular Sensors. They are available in both shielded and unshielded models. OMRON Sensing Components detect, measure, analyze, and process various changes that occur on productions sites, such as changes in position, length, height, displacement, and appearance. They also contribute to predicting and preventing future events.

Features and Benefits

• Correct operation even with aluminum or iron chips sticking to the Sensor
• Only the sensing object is detected.
• Pre-wired Smart click Connector Models also

Rating and Specifications

Model Item		E2EZ-X2D@-N E2EZ-X2D@-M1J E2EZ-X2D@-M1GJ	E2EZ-X4D@-N E2EZ-X4D@-M1J E2EZ-X4D@-M1GJ	E2EZ-X8D@-N E2EZ-X8D@-M1J E2EZ-X8D@-M1GJ	E2EZ-X4C1 E2EZ-X4B1 E2EZ-X4B1-M1J	E2EZ-X8C1 E2EZ-X8B1 E2EZ-X8B1-M1J
Sensing distance		2 mm ±10%	4 mm ±10%	8 mm ±10%	4 mm ±10%	8 mm ±10%
Set distance *1		0 to 1.6 mm	0 to 3.2 mm	0 to 6.4 mm	0 to 3.2 mm	0 to 6.4 mm
Differential travel		20% max. of sensing distance
Detectable object		Ferrous metal (The sensing distance decreases with non-ferrous metal. Refer to Engineering Data on page 4.)
Standard sensing object		Iron, 12 ´ 12 ´ 1 mm	Iron, 30 ´ 30 ´ 1 mm	Iron, 54 ´ 54 ´ 1 mm	Iron, 30 ´ 30 ´ 1 mm	Iron, 54 ´ 54 ´ 1 mm
Response frequency *2		200 Hz	100 Hz	30 Hz	12 Hz	8 Hz
Power supply volt- age (operating voltage range)		12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.			12 to 24 VDC (10 to 30 VDC), ripple (p-p): 10% max.
Current consumption		---			15 mA max.
Leakage current		0.8 mA max.			---
Con- trol output	Load cur- rent	3 to 100 mA max.			NPN open-collector output/PNP open-collector output 100 mA max. at 12 VDC (30 VDC max.) 200 mA max. at 24 VDC (30 VDC max.)
	Residual voltage	3 V max. (Load current: 100 mA, Cable length: 2 m)			2 V max. (Load current: 200 mA, Cable length: 2 m)
Indicators		D1 Models: Operation indicator (red), Setting indicator (green) D2 Models: Operation indicator (red)			Detection indicator (red)
Operation mode (with sensing ob- ject approaching)		D1 Models: NO D2 Models: NC For details, refer to the Timing chart on page 5.			NO For details, refer to the Timing chart on page 5.
Protection circuits		Load short-circuit protection, Surge suppressor			Load short-circuit protection, Reverse polarity protection, Surge suppressor
Ambient temperature range		Operating/Storage: 0 to 50°C (with no icing or condensation)
Ambient humidity range		Operating/Storage: 35% to 95% (with no condensation)
Temperature influence		±20% max. of sensing distance at 23°C in the temperature range of 0 to 50°C
Voltage influence		±2.5% max. of sensing distance at rated voltage in the rated voltage ±10% range
Insulation resistance		50 MÙ min. (at 500 VDC) between current-carrying parts and case
Dielectric strength		1,000 VAC, 50/60 Hz for 1 minute between current-carrying parts and case
Vibration resistance		Destruction: 10 to 55 Hz, 1.5-mm double amplitude for 2 hours each in X, Y, and Z directions
Shock resistance		Destruction: 1,000 m/s2 10 times each in X, Y, and Z directions
Degree of protection		IEC 60529 IP67, in-house standards: oil-resistant
Connection method		Pre-wired Models (Standard cable length: 2 m) and Pre-wired Connector Models
Weight (packed state)		E2EZ-X2D@-N: Approx. 70 g E2EZ-X2D@-M1J: Approx. 40 g E2EZ-X2D@-M1GJ: Approx. 40 g	E2EZ-X4D@-N: Approx. 160 g E2EZ-X4D@-M1J: Approx. 90 g E2EZ-X4D@-M1GJ: Approx. 90 g	E2EZ-X8D@-N: Approx. 220 g E2EZ-X8D@-M1J: Approx. 160 g E2EZ-X8D@-M1GJ: Approx. 160 g	Approx. 170 g	Approx. 270 g
Materi- als	Case	Nickel-plated brass
	Sensing surface	PBT			Heat-resistant ABS
	Clamp- ing nuts	Zinc-plated iron
	Toothed washer	Zinc-plated iron
Accessories		Instruction manual

Download Catalog: E2EZ, Omron-Chip-immune Inductive Proximity Sensor

Ref: omron.co.id