EFS-T Energoflow-Reference Turbine Gas Meters

 

 Reference Turbine Gas Meters EFS-T Energoflow

 

Reference Turbine Gas Meters EFS-T is intended for installation on reference calibration rigs for calibration and verification of gas meters of any type with air as the operating environment. The meters are equipped with an electronics unit (EU) and rotary transducer with mounted binary pulse-frequency sensors and pressure sensors.

 

The meter EFS-T is intended for measuring the volume of gas passing through its input channel of circular section. The gas flow volume is transmitted to a PC via the EU. The meters are designed for vertical installation on the reference equipment with DN 50 mm, DN 80 mm, DN 100 mm, DN 150 mm, DN 200 mm, DN 250 mm, DN 300 mm, DN 400 mm.

 

Technical Data

Parameters	Value
	General industrial application design	Explosion-proof design
Measuring medium	air
Operating pressure, MPa	1,6; 4,0; 6,3
Limits of basic relative permissible error, not worse %	± 0,2
Repetition, at least %	± 0,03
Repeating accuracy within 2 years, at least %	± 0,1
Frequency output with adjusted multiplication factor Fmax, kHz	5
Signal of flow rate excess for the emergency system shutdown	Type «dry contact»
Loading capacitance of emergency output shutdown: voltage, V, max max current, mA, max	24 20
Operating conditions: -The temperature of the operating environment and ambient air, °C, at least - Relative humidity of air at the temperature +25 °C, % - atmospheric pressure, kPa	10 up to 30 up to 80 from 84,0 up to 106,7
Power consumption, W, max	0,5	6,0
Supply voltage, DCV	from 9 up to 24
Lifetime, min. years	10

 

Another Article: LM GN Flow Meters Litre Meters Pelton Wheel Series LMX Flow Meters Litre Meter Pelton Wheel Series Litre Meter Pelton Wheel Series Litre Meter VFF Series MM Flow Meters Litre Meter Pelton Wheel Series

Archive data: 

• hourly- for every preceding hour - the size of archive 1488 records (62 days);
• daily- for every preceding day - the size of archive 730 records;
• power on/off instances - the size of archive 512 messages;
• emergencies - the size of archive 720 messages;
• intervention - changing the adjustment parameters (size of archive 889 messages).

The control software program is used for recording, viewing, and changing the settings of the flow meter, recording, and viewing of measurement data, as well as for reading data archive.

This program allows you to view the archive data and modify the flow meter settings via a PC monitor and then upload the archive data to a file on the flow meter. The flow meter protects settings and archive data from unauthorized changes by restricting access through a system of passwords and hardware-based protection of configuration from being overwritten.

Download Catalog: ULTRASONIC GAS FLOW METERS

Ref: Energoflow.com