Flux Mixer Fast Runners

Anyone who wants to disperse, emulsify, homogenise, chill, dissolve, mix, neutralise, stir, circulate or exchange heat efficiently is faced with a demanding task ‒ from a technical and physical point of view. The mixing effect that flows develop depends on the shape of the container, the material and of course the type of mixer.

Due to the flexible modular system FLUX is able to offer a wide range of options. This makes it possible to configure the mixer components of motor, shaft and mixing blade optimally for the application's requirements. If low speed is required slow running versions can be configured which are provided with intermediate gear and special mixing blades. The FLUX mixers are available in various materials and with different mixing blades.

Mixer Fast Runners

FLUX mixers fast runners for dispersing, emulsifying, homogenising, chilling, dissolving, mixing, neutralising, stirring, circulating or exchanging heat efficiently can be used for container sizes from 30 to 30000 litres.

The FLUX mixer program was consistently developed as a modular system. The drive motors are in correspondence with the IEC standard. The mixer shafts in lengths of 150 to 1800 mm are offered in stainless steel 316 L or with a coating in PVDF or PE and can thus be used for various types of liquids.

Features:

• Circulating performance up to 650 m³/h
• Speed from 750 to 1.500 rpm
• Several mixing blades can also be mounted on top of each other
• Configured for fluids with max. 5 % solid content
• Can be used for IBCs, tanks of up to approx. 4000 l
• For continuous flow systems with 5-20 fold flow per hour

Specification:

• Viscosity: max. 10.000 mPas*
• Circulating performance : max. 3.600 m³/h*
• Container sizes: 30 l to 30.000 l*
• For viscosity up to approx. 1500 mPas:

Rated output	0.55 kW
Power supply	3~ Phase, 50 Hz
Rated voltage	3x400 Volt
Current at rated voltage approx. 1.8 Amp.
Degree of protection	IP 55, Isol.-class. F
Efficiency class	IE1, efficiency 67%
Rated speed	1000 rpm
Type	V1 - Flange-Ø 200 mm
Motor protection switch	IP55, with on/off switch
Emergency stop	for build up on motor switch
Connector cable	PUR-cable, 5m long
Connector Plug	CEE16 with phase changing switch

Download Data Sheet: Mixer Fast Runners

Ref: flux-pumps.com