Hengesbach Pressure Transmitter DME 11 Series

Hengesbach is a company from Deutschland. For more than 50 years Hengesbach develops, manufactures and distributes innovative measuring technology for applications in production processes where functionality, reliability and accuracy of the instruments are of highest priority even under extreme process conditions.

Pressure Transmitter DME 11 Series

The Type DME 11 pressure transmitter with ceramic membrane is a cost-efficient pressure transmitter for standard applications, for example in the energy field. The measuring pressure acts directly on a ceramic membrane that deforms when pressure is applied. The electronic system integrated into the pressure transmitter housing converts the signal generated by the DMS connector on the ceramic membrane into a standard electrical output signal 0…20 mA, 4…20mA or 0…10V DC.

Features:

• output signal 0–20 mA, 3-wire, 4-20 mA, 2-wire or 0-10V DC, 3-wire
• pressure-measuring ranges from 0-1 or -1-0 to 0-400 bar
• for standard applications, e.g. in the energy field

 

Specification:

General information
Device type		DME 11 for operating pressure
Applications		Gases and liquids
Measuring principle		DMS connector on ceramic membrane
Input
Type of pressure				Relative pressure (R)
Nominal Measuring Range		NMR		OPS		NMR	OPS
(bar)		1,6 bar		5 bar		-1...0 bar	3 bar
OPS = Overload Pressure		2,5 bar		8 bar		-1…0,6 bar	5 bar
		4 bar		12 bar		-1…1,5 bar	8 bar
Safety
		6 bar		20 bar		-1…3 bar	12 bar
		10 bar		32 bar		-1…5 bar	20 bar
		16 bar		50 bar		-1…9 bar	32 bar
		25 bar		80 bar		-1…15 bar	50 bar
		40 bar		120 bar		-1…24 bar	80 bar
		60 bar		200 bar
Output
Output signal		4…20 mA, 2-wire
		0…10 V DC, 3-wire
Working resistance		(UB-15V)/0.02A at 0…20 mA and 4…20 mA
		≥ 5 kΩ from 15 V DC at 0…10 V DC
		≥ 2 kΩ from 20 V DC at 0…10 V DC
Current limit		approx. 26 mA and 4…20 mA
		approx. 10.5 V DC at 0…10 V DC
Measuring accuracy
Linearity		< 1% of the measuring range
Hysteresis		< 0.5% of the measuring range
Temperature coefficient		0.04 % FS/K for zero point
		0.025% FS/K for measuring range
Auxiliary energy
Supply voltage		24VDC
Conditions for use
Medium temperature		0°…85°C
Environmental temperature		0°…60°C
Type of protection		IP 65 according to DIN EN 60529
Design configuration
Materials		housing CrNiSt 1.4305
Process connection		parts in contact with the medium made of CrNiSt 1.4305 DIN
Electrical connection		standard plug according to DIN EN 175301-803-A

Download Data Sheet: Pressure Transmitter DME 11 Series

Ref: hengesbach.com