Fluidwell F114 Ratio Monitor and Totalizer

 

The F114 flow computer calculates the actual ratio between two separate flows. It offers the ability to set one low ratio and one high ratio alarm value. Special precautions are taken to allow start-up problems and incorrect ratio readings for a certain period of time. Based on the location of the flowmeters, a selection can be made out of six different formulas.

The display shows the ratio, alarm values, flow rate A, total A, and flow rate B, total B. On-screen engineering units are easily configured from a comprehensive selection. 

Advantages :

• Robust aluminum or stainless steel 316L field enclosure (IP66, IP67 / NEMA Type4X).
  It is so rugged, a truck can even stand on it!
• Intrinsically Safe available - ATEX and IECEx approval for gas and dust applications.
• Familiar easy operation with the Fluidwell "Know one, know them all" configuration structure, saving time, cost, and aggravation.
• Very diverse mounting possibilities: walls, pipes, panels or directly onto outdoor sensors.
  

Features :

• Calculates the ratio between flow A and B.
• Displays ratio, flow rate A and B, and total A and B.
• Ratio monitoring: two alarm values can be set: low and high ratio alarm.
• Alarm values can be changed by the operator or they can be password protected.
• Six ratio calculation formulas.
• Ratio: seven 17mm (0.67") digits, displayed as 1:__ or percentage.
• Flow rate A and B: seven 17mm (0.67") digits.
• Total A and B - resettable: seven 17mm (0.67") digits.
• Separate engineering units for flow rate and total on the display.
• Up to three configurable alarm outputs.
• Displays clear alarm messages.
• LED backlight.
• Intrinsically safe according to ATEX and IECEx.
• GRP, Aluminum, or high-grade stainless steel enclosure.
• Auto backup of settings and running totals in EEPROM memory.
• Ambient temperature: -40°C to +80°C (-40°F to 176°F).
• Various accessories are available for this product.

Applications : 

• Mixing or blending of two components where continuous ratio displaying, monitoring and totalizing is important. For example in construction works, roof or wall isolation, gluing, and coating.
• The F-Series is your first and best choice for field mount indicators in safe and hazardous area applications. Especially in harsh weather conditions like rain, snow, sandy deserts, salty atmospheres, and temperatures between -40°C up to +80°C (-40°F up to 176°F).

Product specifications :

• Signal Inputs :
  • Flowmeter Inputs :
    • Pulse-type inputs:
      Reed-switch, NAMUR, NPN/PNP pulse, Sine wave (coil), active pulse signal.
      Different pulse signal types are allowed for inputs A and B.
      
      
• Signal Outputs :
  • Pulse outputs: None
  • Alarm outputs :
    • Function: Configurable alarm outputs for low, high, or both combined ratio alarms.
    • Type: Up to three passive NPN transistors, active PNP transistors, or isolated electro-mechanical relays.
  • Analog outputs :
    • Function: Re-transmitting the actual ratio, flow rate A or flow rate B - the output can be scaled to any range (e.g. 1:5 to 1:100 or 200 L/min to 1200 L/min).
    • Type: One passive isolated, floating, or loop powered 4 – 20mA output or one active (0)4 – 20mA or 0 – 10V DC output.
      
      
• Supply :
  • Power Supply :
    • Long life Lithium battery.
    • 4 – 20mA Output loop-powered.
    • 8 – 24V AC/DC.
    • 115 – 230V AC.
    • Basic: 8 - 30V DC.
  • Sensor Supply: 3.2, 8.2, 12, 24V DC.
    • 
      
• Hazardous Area :
  • Intrinsically Safe :
    • ATEX:
      Gas: II 1 G Ex ia IIB/IIC T4 Ga
      Dust: II 1 D Ex ia IIIC T100 °C Da
    • IECEx:
      Gas: Ex ia IIC/IIB T4 Ga
      Dust: Ex ia IIIC T100 °C Da
  • Explosion Proof :
    • ATEX: 
      Gas: II 2 G / Ex d IIB T5 Gb
      Dust: II 2 D / Ex t IIIB T100°C Db
      
      
• Communication :
  • Function: All process data and settings can be read and modified through the communication link.
  • Protocol: Modbus RTU.
  • Interface: RS232 / RS485 2-wire or 4-wire / TTL.
  • HART communication is available with the F018 & E018 Flow Rate Monitor / Totalizers.

Download Datasheet: Fluidwell F114 Ratio Monitor and Totalizer

For further please contact us, marketing@wmablog.com


Another Article:

• Fluidwell B Series Basic Flow Indicator
• Fluidwell D Series DIN Panel Mount Flow Indicator
• Fluidwell E Series Explosion Proof
• Fluidwell N Series Batch Controller