Nject Chemical Injection Flow Meter AW Lake

The Nject Chemical Injection Flow Meter is specifically designed for chemical injection applications in onshore oil fields. Each Nject Chemical Injection Flow Meter is individually calibrated and shipped with a calibration certificate, and a completely sealed integral sensor keeps electronics safe from environmental forces. It produces high quality resolution and high accuracy (±0.5% of reading) at low flow rates making it an economical low flow meter for use in onshore chemical injection operations. Specifically Designed for Chemical Injection Applications in Onshore Oil Fields.

Nject Chemical Injection Flow Meter

• Assured Accuracy: Each flow meter is individually calibrated and shipped with a calibration certificate.
• Sealed Electronics: Completely sealed integral sensor keeps electronics safe from environmental forces.
• Economic Low Flow Meter: The meter produces good resolution and high accuracy at low flow rates, offering an affordable option for onshore chemical injection applications.
• Rugged Construction: The sturdy 316 stainless steel construction of this gear meter provides superior corrosion resistance and a longer service life.
• Fast Response Time: This meter can handle short pump shot times (<1 sec) and remain accurate.

Advantages:

1. Assured Accuracy: Each flow meter is individually calibrated and shipped with a calibration certificate.
2. Sealed Electronics: Completely sealed integral sensor keeps electronics safe from environmental forces.
3. Economic Low Flow Meter: The meter produces good resolution and high accuracy at low flow rates, offering an affordable option for onshore chemical injection applications.
4. Rugged Construction: The sturdy 316 stainless steel construction of this gear meter provides superior corrosion resistance and a longer service life.
5. Fast Response Time: This meter can handle short pump shot times (<1 sec) and remain accurate.

Another Article: MAX Machinery Flow Meter Working Principle of Flow Meter How to Choose a Flow Meter Models and Types of Flow Meter Kracht Flow Meter

Specification:

1. Measuring Accuracy: ± 0.5%
2. Repeatability: ± 0.1%
3. Duty Cycle: Works with standard injection pumps from 50 to 200 gallons/day
4. Maximum Operating Pressure: Up to 2,500 psi (172 bar)*
5. Fluid Temperature Range: -40 to 175˚F
6. Resolution: 100,000 pulses/gal
7. Ports: 1/4” female NPT
8. Weight: 3.9 lbs
9. Filtration: 120 microns, 120 mesh
10. Materials of Construction

• Body 316L Stainless Steel
• Gears Stainless Steel
• Bearing & Shaft Tungsten Carbide
• O-Ring PTFE
• Bolts 316 Stainless Steel
• Cable Gland Stainless Steel

Download Data Sheet: Nject Chemical Injection Flow Meter

Ref: aw-lake.com