Ryuki ODM-300 Differential Pressure Flow Meter

A diagram is of model ODM-300SDR Standard Type

Differential pressure is generated by throttling fluid that is flowing in a pipe at (A) as shown in the diagram. By measuring the differential pressure, you can determine the flow rate. In the case of this flow meter, the differential pressure generated in the differential pressure detector is received by a diaphragm of the indicator, and the movement makes the needle shake mechanically with a cam mechanism, and the flow rate is indicated.

• Model ODM-300: General industrial water, seawater, oil, chemicals, other liquids, and similar fluids.
• Model ODM-300S: Contacts are provided for model ODM-300 so that in addition to flow rate indication, it can show whether or not there is a specified flow rate.

 

Specification :

Pressure Range	0.05∼1.0MPa (G)
Temperature Range	0∼100ºC (No condensation or freezing conditions).
Flow Rate Accuracy	±2% (full scale)
Connection Method	Flange Insertion Method
Differential Pressure	MAX0.05MPa
Number of Contacts	1∼2
Contact Method	Microswitch
Contact Capacity	AC125V-5A, 250V-5A
Withstand Voltage	AC125V-5A, 250V-5A (resistance load)
Insulation Resistance	100 MΩ or more with DC500V megger (between terminal and case)

Note: Pressure range and temperature range may vary depending on the material at the connection.

How to Order :

*Example: ODM-300-S-DR-150A•10K-2500L/min-BC
Product of model ODM-300, with one contact, with stop valve, diameter: for 150A•JIS10K, The flow rate range is 500 - 2500 L/min and the material of the main part is BC.

Reference: http://www.ryuki.jp