Anderson Power Products® (APP®), is an international leader in high power interconnect solutions Industries connectors. have become a valued supplier for a wide variety of markets including are used around the world across many markets including: Back-up Power, Telecom & IT Equipment, Motive Power, and Alternative Energy Generation & Distribution, Medical Equipment, Defense, and the Material Handling Industries. APP offers a range of connectors to meet power, signal, & ground needs in protected or environmentally exposed applications. Industry leading OEM’s partner with APP for our superior custom design & qualification capabilities. Anderson Power Products is the best connection.
Anderson™ connectors are used by various educational institutions throughout the year. These teams create everything from robots, rockets and race cars. Reliability, ease of use and a secure connection are just a few reasons why Anderson™ connectors are the right choice for your project.
Product
Euro Battery Connectors
E Series
The Anderson™ family of Euro Battery
Connectors (EBC) are expertly designed for ease of use and incorporate an
innovative contact carrier to simplify assembly. The EBC connectors
include the industry standard 80, 160, and 320 sizes, all in
accordance with DIN 43589-1. Design and materials offer performance that
meets or exceeds all the requirements of EN1175-1. All materials chosen
are RoHS compliant and selected to ensure years of reliability in adverse
industrial environments. These attributes make the EBC DIN connectors the
ideal choice for a wide range of industrial applications in the Material
Handling, Battery Charging, Utility Vehicles, Motive Power, and
Sweeper/Scrubbers markets amongst many others.
A Series
The Anderson Power Products® 'A' Series battery connector
uses the Din 43589-1 form factor which has been modified to meet requirements
for North American markets. While similar in appearance to the E
series it is not intermateable. The “A” series connectors offer
contacts and crimp tooling selections developed for both American Wire
Gauge (AWG) as well as metric wires. This series offers auxiliary
wire contacts that accept a broad range of wires and used for
communication/ control applications. Another key difference is the
use of a higher temperature, higher impact resistant plastic for
applications that require these attributes. This change in plastic
does not meet EN1175-1 which requires a material that offers higher
resistance to Hydrofluorocarbons. The connector design incorporates an
advanced, cost effective contact carrier for ease of assembly and fewer
components. All materials are selected to ensure years of reliable
service under adverse battery environments.
Power Clip®
The
Anderson Power Products Power Clip is designed as a low-cost interconnection
between two perpendicular power bus bars. The products high performance
contact offers low voltage drop and superior amperage carrying capability.
There is no mating connector to the Power Clip as it accepts a solid .125
inches or 3mm thick nickel or gold plated rectangular bus bar tab.
The product
is often used in "N+1" rectifier, power supply and switching
power supply applications. The Power Clip's design enables the connector
to be blind mated in the deepest racks.
The Power Clip is recognized to UL1977 and
CSA standard C22.2 and is rated for up to300 amps continuous service. The
product is also UL approved for a current interruption of 100A at 48V and
200A at 42V using a gold plated bus bar tab.
Power
Drawer®
Anderson
Power Products new line of power drawer series connectors gives our
customers more selections than ever to meet their power connector
needs. These cost effective, mixed power and signal drawer connectors are
manufactured using the same high-quality standards that have made APP a
leader in the power connector industry for years. The drawer series can be
used for a wide range of drawer-type applications such as rectifiers, main
frame computers, telecommunications, and network equipment. If power and
signal is required, let Anderson Power Products be "Your Best
Connection."
PowerMod®
The PowerMod® connector family offers
minimum size and high power. The high performance contacts and insulator are
rated for 30 amps continuous. Applications requiring lower operating
temperatures can be de-rated using our current-temperature chart.
Available in 13 sizes with accessories
offering straight crimp, straight PCB or right angle PCB contact
configurations. The one row male and female connectors are offered in 3,
4, 6 and 8 circuits sizes. Two role male and female are offered in 6, 8,
12 and 16 circuit sizes. Three row male and female are offered in 9, 12,
18, 24 and 30 circuit sizes.
Anderson
Power Products PowerMod® series offers multiple mounting options ranging from
no mounting hardware, to snap in brackets, to self tapping screws, as well as
clam shell housings.
APP connectors are manufactured using the
finest materials and world-class manufacturing processes. They embody the
highest quality in the industry and meet all applicable industry
standards
Powerpole®
This
versatile connector series invented by Anderson Power Products (APP®) meets a
wide range of power connection needs. The four housing sizes in the Powerpole®
product family can carry a wide range of amperage and wire sizes in the most
compact footprint. For currents up to 350A and from wire sizes of #20 AWG (0.75
mm²) to 3/0 (70 mm²). Powerpole® can handle them all! A wide range of
colored housing options can be stacked together to create a proven reliable
custom connector. These housings can be used with different contacts to create
wire-to-wire, wire-to board, or wire-to-busbar connections. The Powerpole®
connector combines high quality materials with a cost-effective and innovative
design for powerful versatility.
Saf-D-Grid®
Anderson
Power Products® has led the connector industry in the development of DC
power connection solutions since the introduction of the SB® electrical
connector in 1953. Saf-D-Grid® builds on the proven contact
technology used in SB® and Powerpole® connectors by offering features
required in 380-400VDC power distribution systems. APP®
developed the Saf-D-Grid® connector system as a
safe appliance power connector for server, telecommunication, and other
devices up to 600 VDC. The APP® Saf-D-Grid® plug and receptacle
provide for the direct connection of AC and DC electronic devices. to a DC
micro-grid powered by renewable energy or high efficiency DC
sources. The connector meets international safety requirements for
hazardous, low voltage applications including UL 950 and IEC60950. The
Saf-D-Grid® is size compatible with the IEC 320C13 and C14
connection system. It is the only connector system
so sized that is UL rated for current interrupt of up to 400 VDC and 30
amp load. Saf-D-Grid® also enables greater power density by allowing
up to 30A and 600V (disconnect) DC or AC within the same space of the
IEC320 C13 & C14 system that is typically limited to 10A and 250
VAC. This allows the use of Saf-D-Grid® in AC systems that require
more power by increasing the wattage capability within the
existing connector space.
SB® Series
Based
off the design pioneered by Anderson in 1953, the two pole SB® connectors
set the standard for DC power distribution and battery connections.
SB connectors feature a rugged one piece plastic housing using stainless
steel springs to retain the contacts and create the “contact force” that
provides extremely low resistance enabling greater electrical efficiency.
The SB connectors are also genderless (flip one 180 degrees and they will
mate to each other) reducing the customer’s bill of materials and
providing greater economies of scale when purchasing. The SB series of
connectors range in size from SB50 to the SB350. Each family size
offers color-coded, mechanically keyed housings designed to prevent
both visually and physically cross-mating devices with different voltages.
All the connectors are UL rated to 600 volts so the keys and colors are
just identifiers to prevent accidents. Contacts are traditionally Silver plated
to minimize electrical resistance while offering supreme durability and
reliability.
MARC Series
The
Multi Axial Rotational Connector “MARC” features 8 Powerpole®
contacts integrated into a blindmate housing. The connector is
designed to blindmate from 2 rotating axis or straight on. The two row,
horizontally oriented connector uses our industry leading flat wiping
contacts. The MARC is rated to 29 amps per circuit and can be configured
with 8 standard length contacts or 6 standard length and 2 premate,
multi-purpose contacts, which can function as ground, power or signal. The rugged
connector is UL listed and rated up to 10,000 mating cycles. The
dielectric is a chemically resistant PBT plastic. APP® connectors are
manufactured using the finest materials and world-class manufacturing
processes. They embody the highest quality in the industry and meet all
applicable industry standards.
SBE® / SBX®/
SBO® Series
SBE® and
SBX® connectors build on the capability of the SB® connectors that handle
two primary power contacts with the capacity to have up to 8 auxiliary
power / signal contacts. The centers of the connector housing's feature a
location for either: two PP15-45 housings and contacts, an innovative 1x4
auxiliary accessory, or two PPMX housings that can accommodate up to 8 aux
contacts. In addition, the housings meet IEC 60950 & IEC60529 touch safe
requirements.
Sequencing within auxiliary positions is
possible using the 4 pin lengths available in the 1x4
auxiliary accessory however the auxiliary contacts mate last /
un-mate first in relationship to the power contacts. While SBE® and
SBX® housings offer similar capabilities, the SBE® connector housings
are molded from a chemical resistant PBT/PC blend resin allowing them
to meet EN1175-1 requirement and are tested to EN1175-1 standards. SBX®
are molded from a rugged PC resin that is more impact resistant and are
tested to UL/CSA requirements.
SBS® Series
SBS ® Connector Series – Standard Housings
The
patented SBS® connector family is designed to provide high power in a compact
ergonomic housing with protection against accidental contact with
live circuits. This is of particular importance in applications
where DC voltages exceed 30 volts and can be health threatening.
SBS® Mini
connectors are the smallest DC power connectors available in the SBS series
rated up to 52 amps. Each housing securely holds two power contacts designed
with flat-wiping technology to enable hot swapping capabilities to 45 amps at
72 volts on DC circuits.
SBS®50, SBS®75X and SBS®75G are
available in Wire-to-wire and wire-to-board configurations
both provide power contacts rated up to 110 amps. The SBS®75X
offers up to 4 mate-last break-first auxiliary power / signal contacts
rated up to 20 amps. The SBS®75G features a third first-mate
last-break ground or power contact. All contact positions are
rated for circuit interruption (hot plugging).
SPEC Pak®
APP®’s SPEC Pak® Connector
Series are rugged and environmentally sealed (IP68) certified connectors
made from PC, PC/ PBT material that is UL94 V-0 flame resistance.
Available in wire to wire or wire to panel configurations. Choose between
pin and socket or flat wiping contact technology designs for applications
demanding a waterproof high-power
interconnect solution for power, ground and
signaling capabilities. Intended applications include off-road vehicles,
factory automation, lighting, marine, oil and petrochemical exploration,
agricultural equipment, and many more.
SB Smart
The SB® Smart is designed
for applications where storage batteries intelligently interact with the
system. Two primary power positions (up to 230 amps each) are
combined with sixteen auxiliary power / signal positions (up to 15 amps
each) into a single interconnect solution. This allows one connection to
be used to route high power lines, low power lines, and signal circuits.
Unique to the SB® Smart is the
selectively keyed housings that allow only mating between select connector
halves. This prevents motors from mating with chargers, chargers from mating
with chargers, or other undesirable connection scenarios.
PowerMod HP
Komentar
Posting Komentar
Informasi Pilihan Identitas:
Google/Blogger : Khusus yang punya Account Blogger.
Lainnya : Jika tidak punya account blogger namun punya alamat Blog atau Website.
Anonim :