TA3 Sanitary Turbine Flow Meter AW Lake

TA3 Sanitary Turbine flow meters are constructed of 316 stainless steel for a durable and economic flow metering in sanitary environments.  This meter is 3-A Sanitary Standard Authorized as all materials and polishing technologies utilized during manufacturing on internal components comply with FDA requirements. I

n service around the world in sanitary industries including dairy, brewing, food processing and pharmaceutical processing. This meter is available in nine different flow ranges from 0.6 to 400 gallons/day, and can withstand system pressures up to 20,000 psi.

This 3-A Sanitary Standard Authorized turbine flow meter is used in plants around the world, in industries including dairy, brewing, wine production, food processing and pharmaceuticals.

Advantages:

1. Durable & Cost Effective: This meter’s rugged 316 stainless steel construction provides a durable and economic flow metering solution to sanitary environments.
2. Excellent Accuracy: The TA3 sanitary turbine flow meter can achieve a flow accuracy up to 1.0% of reading and is repeatable up to 0.1%.
3. Federal Compliance: The most up-to-date polishing technology is utilized during manufacturing on all internal components, and all materials comply with FDA requirements.
4. Flexible: This meter is available in nine different flow ranges, covering flows from 0.6 GPM up to 400 GPM.
5. Versatile: This flow meter provides local flow rate and volume totalization and will interface with most displays, controllers and computers.

Features:

• Sanitary Standards: Conforms to 3-A Sanitary Standards
• Measuring Accuracy: ±1.0% of reading or better (±1% of reading over the upper 70% of the measuring range for 3/8, 1/2 and 3/4 in. meters)
• 9 Flow Ranges: 0.6 to 400 GPM
• Pressure Rating: up to 1,000 PSI
• Temperature Rating: -150˚ to 300˚F (-100˚ to 149˚C)

Another Article: Subsea Turbine Flow Meter AW Lake Working Principle of Flow Meter How to Choose a Flow Meter Models and Types of Flow Meter TW Turbine Flow Meter AW Lake

Specification:

Measuring Accuracy: ± 1.0% of reading or better (±1% of reading over the upper 70% of the measuring range for 3/8, 1/2 and 3/4 in. meters)

Repeatability: ± 0.1%

Flow Measuring Range:

• .6 to 3
• .75 to 7.5
• .75 to 7.5
• 2 to 15
• 3 to 30
• 5 to 50
• 15 to 180
• 40 to 400

Turn Down Ratio: 10:1

Maximum Operating Pressure: 1000 psi (sanitary clamp rated at 250 psi at 300°F)

Maximum Operating Temperature: Fluid temperature up to 300°F

Electrical Connection: NEMA 6 Connector

End Connection: Tri-clamp

Materials Of Construction:

• Body:  316L Stainless Steel
  
• Rotor Support:  316L Stainless Steel
  
• Rotor:  Nickel Plated Stainless Steel
  
• Bearings:  Nickel Bindery Tungsten Carbide

Download Data Sheet: TA3 Sanitary Turbine Flow Meter

Ref: aw-lake.com