Mercotac Two Conductor Electrical Connectors | Two Conductors 4 Amps
Model 205
- High-speed model available (205-H)
- Low-torque/low-temp. models available (205-L)
- Available with stainless steel ball-bearing (205-SS)
Mercotac model 205 is ideal for two-wire applications, such as thermocouples, strain gages, eddy current test devices, and wind turbine blade sensors, due to its compact size, quality signal connection, low torque, and low cost. Model 205 replaces the old model 590 for Leslie speakers and Hammond organs.
Model No. | Terminals | Voltage AC/DC | Amp Rating @240VAC | Max. Freq. MHz | Contact Resistance | Max. RPM | Temp Max. F (C) / Min. F (C) | Rotation Torque (gm-cm) | Circuit Separation |
205 | 2 | 0-250 | 4 | 200 | <1mΩ | 2000 | 140 (60) /45(7) | 75 | >25MΩ |
205-SS | 2 | 0-250 | 4 | 200 | <1mΩ | 2000 | 140 (60) /45(7) | 75 | >25MΩ |
205-L | 2 | 0-250 | 4 | 200 | <1mΩ | 1200 | 140 (60) /-20(-29) | 20 | >25MΩ |
205-LS | 2 | 0-250 | 4 | 200 | <1mΩ | 1200 | 140 (60) /-20(-29) | 75 | >25MΩ |
205-H | 2 | 0-250 | 4 | 200 | <1mΩ | 3600 | 140 (60) /45(7) | 35 | >25MΩ |
205-HS | 2 | 0-250 | 4 | 200 | <1mΩ | 3600 | 140 (60) /45(7) | 35 | >25MΩ |
"SS" designator indicates stainless steel ball-bearing (recommended for wet or corrosive environments)
"L" designator indicates low torque / low temp.
"LS" designator indicates low temp. & stainless steel ball-bearing
"H" designator indicates high RPM
"HS" designator indicates high RPM & stainless steel ball-bearing
Model 205 is typically mounted by the knurled metal receptacle, which is press-fit into the rotating member of the machine. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Model 230
Two Conductors, 30 Amps
- Disconnects included (4 LG.)
- Boot Kit available
- Available with stainless steel ball-bearing (230-SS)
Model No. | Terminals | Voltage AC/DC | Amp Rating @240VAC | Max. Freq. MHz | Contact Resistance | Max. RPM | Temp Max. F (C) / Min. F (C) | Rotation Torque (gm-cm) | Circuit Separation |
230 | 2 | 0-250 | 30 | 200 | <1mΩ | 1800 | 140 (60) /-20(-29) | 200 | >25MΩ |
230-SS | 2 | 0-250 | 30 | 200 | <1mΩ | 1800 | 140 (60) /-20(-29) | 200 | >25MΩ |
"SS" designator indicates stainless steel ball-bearing (recommended for wet or corrosive environments)
Model 230 is typically mounted by the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Another Article: |
Model 235 | Two Conductors, 2@30amps & 500V
- Disconnects included (4 lg.)
- Boot Kit available
- Available with stainless steel
- ball bearing (235-SS)
Model No. | Terminals | Voltage AC/DC | Amp Rating @500VAC | Max. Freq. MHz | Contact Resistance | Max. RPM | Temp Max. F (C) / Min. F (C) | Rotation Torque (gm-cm) | Circuit Separation |
235 | 2 | 0-500 | 30 | 100 | <1mΩ | 1200 | 140 (60) /-20(-29) | 400 | >50MΩ |
235-SS | 2 | 0-500 | 30 | 100 | <1mΩ | 1200 | 140 (60) /-20(-29) | 400 | >50MΩ |
"SS" designator indicates stainless steel ball-bearing (recommended for wet or corrosive environments)
Model 235 is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Model 215-2K | Two Conductors, 2@15amps & 2,000V
- Disconnects included (4 lg.)
- Boot Kit available
- Available with stainless steel
- ball bearing (215-2KSS)
Mercotac model 215-2K series is ideal for high-voltage, two-wire applications such as ultrasonic welding.
Model No. | Terminals | Voltage AC/DC | Amp Rating @2000VAC | Max. Freq. MHz | Contact Resistance | Max. RPM | Temp Max. F (C) / Min. F (C) | Rotation Torque (gm-cm) | Circuit Separation |
215-2K | 2 | 0-2,000 | 15 | 100 | <1mΩ | 1200 | 140 (60) /-20(-29) | 400 | >50MΩ |
215-2KSS | 2 | 0-2,000 | 15 | 100 | <1mΩ | 1200 | 140 (60) /-20(-29) | 400 | >50MΩ |
"SS" designator indicates stainless steel ball-bearing (recommended for wet or corrosive environments)
Model 215-2K is typically mounted by either the black body or the white plastic bushing on either end using a set screw. When mounting horizontally, mount the Mercotac so the body of the connector rotates.
Reference: mercotac.com
Komentar
Posting Komentar
Informasi Pilihan Identitas:
Google/Blogger : Khusus yang punya Account Blogger.
Lainnya : Jika tidak punya account blogger namun punya alamat Blog atau Website.
Anonim :